线性APD混合飞行时间测距模型及读出电路设计  

Linear APD hybrid time-of-flight ranging model and readout circuit design

作　　者：邵家起 陈洪雷[1,3] 丁瑞军 Shao Jiaqi;Chen Honglei;Ding Ruijun(Key Laboratory of Infrared Imaging Materials and Detectors,Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai 200083,China;School of Information Science and Technology,Shanghaitech University,Shanghai 200120,China;University of Chinese Academy of Sciences,Beijing 100049,China)

机构地区：[1]中国科学院上海技术物理研究所红外成像材料与器件重点实验室,上海200083 [2]上海科技大学信息科学与技术学院,上海200120 [3]中国科学院大学,北京100049

出　　处：《红外与激光工程》2023年第9期86-95,共10页Infrared and Laser Engineering

摘　　要：混合飞行时间测距基于间接飞行时间测距的原理,同时结合直接飞行时间测距的概念,可以实现高精度、高范围的脉冲激光测距。采用两相采集方式,建立了背景光抑制的两段两相混合测距模型,并通过对模型的误差分析确定了电路的相关参数。采用在线性模式下工作的雪崩光电二极管(Linear-Mode APD,LM-APD)作为探测器,设计了与混合测距模型适配的50μm中心距的像素电路以及5×5阵列结构。电路输入级采用电容反馈跨阻放大器结构,输出信号包括模拟信号和低压差分信号。在对APD探测器20 MHz的调制频率下,输出电压达到99.8%以上的线性度,在108.75 m测距范围内达到4.415 cm的平均误差,11.355 cm的最大误差。仿真表明:混合测距兼顾精度和测量范围,适用于激光雷达三维成像领域。Objective Currently,3D image sensors based on time-of-flight ranging have been widely used in military and civil applications,such as astronomical detection,target identification,and unmanned vehicles.They are currently being developed in the direction of high sensitivity,high accuracy,and low power consumption in the future.Hybrid time-of-flight ranging,which can achieve high accuracy and high range of lidar ranging,is based on the principle of indirect time-of-flight ranging while incorporating the notion of direct time-of-flight ranging.It has become one of the development paths of time-of-flight ranging.For this purpose,a hybrid ranging model and a 5×5 array readout circuit with 50μm center distance are designed based on an APD in linear mode as the detector.Methods A two-segment,two-phase hybrid ranging model is built in this paper(Fig.4).Based on this model,the time-of-flight solution was implemented and the error of background light and counter clock frequency was simulated(Fig.6-7).In order to adapt to the model,the readout circuit selects Capacitor Feedback Transimpedance Amplifier(CTIA)as the input stage,outputs a voltage signal through a sample-and-hold circuit,and generates an 8-bit digital signal through a positive feedback comparator and True Single Phase Clock counter(Fig.3).The accuracy of intensity information is determined by calculating the linearity of the analog voltage output(Fig.9).The accuracy of distance measurement is analyzed by combining analog and digital signals,calculating the time of flight in the vicinity of 108.75 m,and comparing the result to the ideal value(Fig.10).Results and Discussions The hybrid ranging readout circuit can be passively integrated over a range of 0.5 V to 2.5 V with high injection efficiency.CTIA output voltage has 99.83%linearity(Fig.9).In the hybrid ranging simulations over a range of 108.75 m,the K values were correctly determined for most subperiods.The maximum and average errors in the last subperiod are 11.355 cm and 4.415 cm respectively(Fig.10).Thi

关 键 词：混合飞行时间测距 读出电路 线性模式雪崩光电二极管 激光雷达 

分 类 号：TN215[电子电信—物理电子学]