蒙套自动清洁机构的分析与设计  

Design of Flexible Automatic Grinding System for Aluminum Frame

作　　者：唐亮 TANG Liang(Guangdong Machinery Research Institute Co.,Ltd.,Guangzhou 510705)

机构地区：[1]广东省机械研究所有限公司,广州510705

出　　处：《现代制造技术与装备》2023年第10期205-208,215,共5页Modern Manufacturing Technology and Equipment

摘　　要：在转子涂敷领域,涂敷粉末落到蒙套表面经高温固化会形成结块,长期累积会造成涂敷尺寸和质量不稳定。目前,行业中主要采用蒙套定期回收进行离线处理,用物理或化学药水浸泡方法进行清除,工作量大。如果采用化学药水浸泡方式,还可能造成环境污染。基于这种情况设计了蒙套在线自动清洁机构,对蒙套结块粉尘进行在线清洁,对清洁产生的粉尘进行回收处理,使设备可长时间连续生产。该机构对改善转子涂敷质量、提升设备稳定性以及降低劳动强度等有积极作用。In the field of rotor coating,the coating powder will fall on the surface of the sleeve and solidify at high temperature to form caking.At present,the industry is mainly used for off-line treatment of periodic recovery of the jacket,with physical or chemical water immersion methods to remove,a large workload.If the use of chemical water immersion,but also may cause environmental pollution.Based on this situation,an on-line automatic cleaning mechanism is designed,which can clean the caking dust on-line and recycle the dust,so that the equipment can be produced continuously for a long time.The mechanism can improve the quality of rotor coating,improve the stability of equipment and reduce labor intensity.

关 键 词：清洁机构 蒙套 机械手 仿形刀具 粉尘回收 

分 类 号：TH122[机械工程—机械设计及理论]