基于ANSYS的汽车转向轴总成轻量化设计  

Lightweight design of automotive steering shaft assembly based on ANSYS

作　　者：徐丹 XU Dan(Jiangsu Union Technical Institute Changzhou Liuguojun branch,Changzhou Jiangsu 213025,China)

机构地区：[1]江苏联合职业技术学院常州刘国钧分院,江苏常州213025

出　　处：《林业机械与木工设备》2023年第10期61-66,共6页Forestry Machinery & Woodworking Equipment

摘　　要：以某SUV汽车转向轴总成为研究对象,利用UG软件对转向轴总成进行三维建模,结合ANSYS有限元分析得到模型减重优化方向。通过对转向轴总成在轻量化设计前后的结构强度与刚性对比分析,得出满足使用要求的轻量化优化方案,为后续轻量化设计工作起到了重要的指导作用。Taking the steering shaft of an SUV as the research object,the 3D modeling of the steering shaft assembly was carried out by using UG software,and the optimization direction of the model weight reduction was obtained by ANSYS finite element analysis.Through the comparative analysis of the structural strength and rigidity of the steering shaft assembly before and after the lightweight design,the light weight optimization scheme meeting the use requirements is obtained,which plays an important guiding role for the subsequent lightweight design.

关 键 词：ANSYS 转向轴总成 强度 刚性 轻量化 

分 类 号：TH6[机械工程—机械制造及自动化] U463.46[机械工程—车辆工程]