检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴岳洋 覃方君[1] 李冬毅 黄春福 WU Yueyang;QIN Fangjun;LI Dongyi;HUANG Chunfu(School of Electrical Engineering,Naval University of Engineering,Wuhan 430033,China)
机构地区:[1]海军工程大学电气工程学院,湖北武汉430033
出 处:《仪表技术与传感器》2023年第11期73-77,共5页Instrument Technique and Sensor
基 金:国家自然科学基金项目(61873275,42274013)。
摘 要:针对调制转移光谱稳频(MTS)系统中,温度波动会影响激光频率稳定性的问题,设计出多点测温系统。该系统以FPGA为核心,通过基准电压源激励电桥电路,将三线制PT1000温度变化转换为电压变化,利用同步采样ADC对转换电压进行采集,最后在LabVIEW中将采集电压转换为温度实时显示和存储。信号调理电路中的抗射频干扰滤波和FPGA中的均值滤波,可降低噪声干扰,提高测温精度。实验结果表明:该系统具备线性度好、精度高、重复性好的优点,可对10~80℃的温度进行监测和存储,采用分段线性拟合后,其测温误差不超过0.02℃,可以满足实验需求。In modulation transfer spectroscopy frequency stabilization(MTS)system,temperature fluctuation will affect the stability of laser frequency.A multi-point temperature measurement system was designed.The system used FPGA as the core,and the bridge circuit was excited by a reference voltage source to convert a three-wire PT1000 temperature change into a voltage change.The converter voltage was sampled by a synchronous sampling ADC,which was converted into real-time display and stored temperature in LabVIEW.The anti-RFI filter in signal conditioning circuit and mean filter in FPGA can reduce noise interference and improve temperature measurement accuracy.Experimental results show that the system has satisfactory linearity,high precision and good repeatability.It can monitor and store temperature at 10℃to 80℃.After using segmented linear fitting,the temperature measurement error does not exceed 0.02℃,which can meet experimental requirements.
关 键 词:MTS PT1000 温度采集 FPGA LABVIEW
分 类 号:TP273[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.147