平板式制动检验台建模与仿真  

Modeling and Simulation of Flat Brake Test Bench

作　　者：张子豪 ZHANG Zihao(School of Automobile,Chang'an University,Xi'an 710064,China)

机构地区：[1]长安大学汽车学院,陕西西安710064

出　　处：《汽车实用技术》2024年第1期146-152,共7页Automobile Applied Technology

摘　　要：针对汽车制动性能检测问题,对平板式制动检验台检测机理进行研究。利用CarSim-Simulink联合仿真方法建立了平板式制动检验台仿真计算模型,通过对标试验验证了模型的准确性,模型误差在±5%以内,能够准确反应不同车型制动时前、后轴制动力的变化。基于验证后的仿真模型对汽车制动时的轴荷转移展开进一步的研究,随着载荷的增大,汽车最大制动力与最大轴荷转移量增大。In order to solve the problem of automobile brake performance testing,this paper studies the testing mechanism of flat plate brake test bench.Using CarSim-Simulink co-simulation method,the simulation calculation model of flat plate brake test bench is established,and the accuracy of the model is verified by standard test.The model error is within±5%,which can accurately reflect the change of front and rear axle braking force when different vehicles are braking.Based on the verified simulation model,the axle load transfer of the vehicle during braking is further studied.With the increase of the load,the maximum braking force and the maximum axle load transfer increase.

关 键 词：平板式 制动检测 联合仿真 轴荷转移 CarSim-Simulink 

分 类 号：U466[机械工程—车辆工程]