检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高成[1] 刘宇盟 黄姣英[1] 李凯 Gao Cheng;Liu Yumeng;Huang Jiaoying;Li Kai(School of Reliability and Systems Engineering,Beihang University,Beijing 100191,China)
机构地区:[1]北京航空航天大学可靠性与系统工程学院,北京100191
出 处:《电子测量技术》2023年第17期155-159,共5页Electronic Measurement Technology
摘 要:在电磁兼容测试领域,缺乏适用于数字磁耦隔离器的磁场抗扰度评价方法。针对此问题,研究数字磁耦隔离器的工作原理,基于电磁兼容原理和IEC等标准,建立一套基于GTEM小室法的针对数字磁耦隔离器的磁场抗扰度评价方法。搭建测试系统,设计电路板,采用测试座法解决抗扰测试中磁场耦合方向不正确和强度不足的问题,定义电平波动和固定0/1两种失效模式和判据,设计结构分析对照表。对GL1200P型号数字磁耦隔离器进行案例验证,验证测试方法可行性,确定器件抗扰失效敏感频率为113 MHz,评级为400 V/m—C级。案例验证说明该方法可以对数字磁耦隔离器抗扰度进行评价。In the field of EMC testing,there is a lack of magnetic field immunity evaluation methods suitable for digital magnetic isolators.To solve this problem,the following studies were carried out.Firstly,the working principle of the digital magnetic isolator is studied.Based on the principle of electromagnetic compatibility and IEC standards,a set of evaluation methods for the magnetic field immunity of the digital magnetic isolator based on the GTEM small chamber method is established.The test system was built,the circuit board was designed,the test seat method was used to solve the problems of incorrect direction and insufficient strength of the magnetic field coupling in the disturbance rejection test,two failure modes and criteria of level fluctuation,and fixed 0/1 were defined,and the comparison table for structural analysis was designed.Second,the case of the GL1200P digital magnetic isolator was verified to verify the feasibility of the test method,and the device’s anti-disturbance failure sensitive frequency was determined to be 113 MHz,and the rating was 400 V/m—C.The case proves that this method can evaluate the immunity of digital magnetic isolators.
关 键 词:数字磁耦隔离器 电磁兼容 磁场抗扰度 GTEM小室
分 类 号:TN407[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.90