模块类网络安全产品的智能测试系统设计  

Design of Intelligent Testing System for Modular Network Security Products

作　　者：孟珞珈[1] 郭元兴[1] 盛强强 杨光 廖熹 李建国[1] MENG Luojia;GUO Yuanxing;SHENG Qiangqiang;YANG Guang;LIAO Xi;Li Jianguo(No.30 Institute of CETC,Chengdu 61004l,China)

机构地区：[1]中国电子科技集团公司第30研究所,成都610041

出　　处：《计算机测量与控制》2024年第1期37-44,50,共9页Computer Measurement &Control

基　　金：国家重点研发计划项目(2021YFB3302104)。

摘　　要：为提高模块类网络安全产品的批量测试效率,降低人力成本及换线时间,开展了模块类网络安全产品的智能测试系统设计;通过对模块类网络安全产品的智能测试需求进行分析,采用将搭载图像传感器的工业机械手与基于PXI架构的测试系统相结合的技术路线,并对机械手控制技术和PXI总线测试平台设计技术进行了研究;创新设计了模块类网络安全产品的智能测试系统,对测试工艺流程进行优化与再造,实现了产品上下料、型号识别与柔性换线、智能装夹、批量测试、合格品与不合格品分拣等流程的一站式无人值守运转;经实际应用验证,智能测试系统的单日测试产能提升超过180%,单日人工工时减少93%以上,换线时间从平均70分钟减少到10分钟以内。In order to improve the efficiency of batch testing for modular network security products,and reduce the labor cost of human resources and time of test line changing,an intelligent testing system design for the modular network security products was carried out;The intelligent testing requirement of the modular network security products was analyzed to adopt the technical route that combines industrial robots equipped with image sensor with testing system based on PXI architecture,and study the robot arm control technology and PXI bus testing platform design technology.This paper innovatively designed an intelligent testing system for the modular network security products,optimized and recreated the testing process flow,and achieved the one-stop unmanned operation of the product loading and unloading,model identification and flexible line changing,intelligent clamping,batch testing,and sorting of qualified and unqualified products;Through actual verification,the daily testing capacity of the intelligent testing system is increased by more than 180%,the daily labor hour is reduced by over 93%,and the time of line changing is reduced from an average of 70 minutes to within10 minutes.

关 键 词：网络安全产品 机械手系统 图像传感器 PXI架构 智能测试系统 

分 类 号：TP273.5[自动化与计算机技术—检测技术与自动化装置]