检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴小凌 陈会平 李顺 吴世杰 张师帅[2] Wu Xiaoling;Chen Huiping;Li Shun;Wu Shijie;Zhang Shishuai(Wanbao Group Compressor Co., Ltd.;Huazhong University of Science and Technology)
机构地区:[1]广州万宝集团压缩机有限公司 [2]华中科技大学
出 处:《制冷与空调》2023年第12期105-110,共6页Refrigeration and Air-Conditioning
摘 要:根据冰箱压缩机启动过程的特点,采用ANSYS软件对冰箱压缩机排气管路进行流场和声场模拟仿真计算,分析冰箱压缩机启动过程排气噪声特性。在排除偶极子噪声和四极子噪声的基础上得出,单极子声源对启动过程的排气噪声贡献最大。考虑到单极子噪声主要受气流速度影响,为降低排气流域最高气流速度,提出将排气腔与排气管进口的连接管道由单通道调整为双通道。仿真结果表明,双通道模型可以使启动过程中排气流域最高气流速度下降5~20 m/s,使排气噪声总声压级下降2~5 dB,进一步验证双通道结构降噪的有效性。研究结果可以为解决冰箱压缩机启动过程排气噪声问题提供理论依据。According to the characteristics of the startup process of the refrigerator compressor,the flow field and sound field of the exhaust pipe of the refrigerator compressor are simulated by using the ANSYS software,and the exhaust noise characteristics of the refrigerator compressor during the startup process are analyzed.On the basis of eliminating dipole noise and quadrupole noise,it is concluded that monopole sound source contributes the most to exhaust noise during startup process.Considering that the monopole noise is mainly affected by the airflow velocity,in order to reduce the maximum airflow velocity in the exhaust area,it is proposed to adjust the connecting pipe between the exhaust chamber and the exhaust pipe inlet from a single channel to a dual channel.The simulation results show that the dual channel model can reduce the maximum airflow velocity in the exhaust area by 5-20 m/s and the total sound pressure level of exhaust noise by 2-5 dB during the startup process,further verifying the effectiveness of dual channel structure noise reduction.The research results can provide a theoretical basis for solving the exhaust noise problem of refrigerator compressor during startup process.
分 类 号:TB6[一般工业技术—制冷工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200