注水放空系统阀门国产化研制  

Domestic Development of Valves for Jacket Flooding and Venting System

作　　者：李华山 王路 张大伟 赵晓磊 樊文东 王献峰 LI Hua-shan;WANG Lu;ZHANG Da-wei;ZHAO Xiao-lei;FAN Wen-dong;WANG Xian-feng(Offshore Oil Engineering Co.,Ltd.,Tianjin 300000,China;Xuanda Industrial Group Co.,Ltd.,Wenzhou 325000,Zhejiang,China)

机构地区：[1]海洋石油工程股份有限公司,天津300000 [2]宣达实业集团有限公司,浙江温州325000

出　　处：《阀门》2024年第1期117-122,共6页VALVE MAGAZINE

基　　金：海洋石油工程股份有限公司科技项目:导管架附属装置国产化研制(项目编号:E-0822P016)。

摘　　要：导管架附属装置国产化项目研制中,注水放空系统是导管架附属装置的关键子系统。注水放空系统阀门是该子系统的关键部件,需要对注水放空系统阀门同步进行国产化研制,以实现整套导管架附属装置国产化的目标。通过拆解研究进口的注水放空系统阀门,进行阀门对标分析。研究注水放空系统阀门在整套装置中的作用,依据工况,对阀门进行差异化创新设计,制定可靠的产品方案。按产品方案做工程样机,通过动作寿命试验、极限温度循环试验及水下450 m工况模拟试验等型式测试,工程样机得到充分验证,通过专家组的产品验收鉴定,注水放空系统阀门就可实现了国产化替代。In the development of the localization project for jacket attachment devices,the water injection and venting system is a key subsystem of the jacket attachment device.The valve of the water injection and vent system is a key component of this subsystem,and it is necessary to conduct localization research and development of the water injection and vent system valve simultaneously to achieve the goal of localization of the entire jacket accessory device.Conduct valve benchmarking analysis by disassembling and researching the imported water injection and venting system valves.Study the role of water injection and vent system valves in the entire device,conduct differentiated and innovative design of valves based on operating conditions,and develop reliable product plans.According to the product plan,the engineering prototype has been fully validated through type tests such as action life test,extreme temperature cycle test,and underwater 450 meter working condition simulation test.Through product acceptance and appraisal by the expert group,the valve of the water injection and vent system can be replaced domestically.

关 键 词：注水放空系统 双推力垫 双轴承 冗余 

分 类 号：TH134[机械工程—机械制造及自动化]