起泡条件下矩形窄缝通道内压力场和温度场数值模拟  

Numerical Simulation of Pressure and Temperature Fields in Rectangular Narrow Channel under Blistering Condition

作　　者：王雪鉴 赵亚楠 于涛[1,2,3] Wang Xuejian;Zhao Yanan;Yu Tao(School of Nuclear Science and Technology,University of South China,Hengyang,Hunan,421001,China;Research Center for Digital Nuclear Reactor Engineering and Technology of Hunan Province,Hengyang,Hunan,421001,China;Key Laboratory of Advanced Nuclear Energy Design and Safety,Ministry of Education,Hengyang,Hunan,421001,China)

机构地区：[1]南华大学核科学技术学院,湖南衡阳421001 [2]数字化反应堆湖南省工程技术研究中心,湖南衡阳421001 [3]先进核能技术设计与安全教育部重点实验室,湖南衡阳421001

出　　处：《核动力工程》2024年第2期82-87,共6页Nuclear Power Engineering

基　　金：国家自然科学基金项目(12205142);湖南省科技创新团队项目(2020RC4053);湖南省教育厅优秀青年项目(20B490)。

摘　　要：当矩形窄缝通道由于辐照肿胀产生形变出现起泡结构时,通道内流动传热特性会发生改变。本文采用数值计算方法分析了起泡条件下矩形窄缝通道内流体压力场和温度场分布。结果表明,起泡对流体的阻碍作用会导致流体在第一个起泡前出现压力高点。经过每一个起泡,局部压降均会先飞升后突降,起泡处流体温度上升,壁面温度下降。通过模型计算分析获得了起泡条件对压力场和温度场的影响规律。When the rectangular narrow channel is deformed due to radiation blistering,the flow heat transfer characteristics in the channel will be changed.In this study,the fluid pressure field and temperature field in the rectangular narrow channel under blistering condition is analyzed by numerical calculation method.The results show that the blocking effect of blistering on the fluid leads to a high pressure point before the first blistering.After each blistering,the local pressure drop suddenly rises first and then suddenly drops,causing the fluid temperature at the blistering to rise and the wall temperature to decrease.The influence of blistering conditions on the pressure and temperature fields is obtained through model calculation and analysis.

关 键 词：起泡 矩形窄缝通道 压力场 温度场 数值模拟 

分 类 号：TL334[核科学技术—核技术及应用]