碳化材料的烧蚀性能参数辨识方法  

Identification method of ablation performance parameters of carbonized materials

作　　者：程莫瀚 李文光[1] 王志 CHENG Mohan;LI Wenguang;WANG Zhi(School of Aerospace Engineering,Beijing Institute of Technology,Beijing 100081,China)

机构地区：[1]北京理工大学宇航学院,北京100081

出　　处：《北京航空航天大学学报》2024年第4期1384-1391,共8页Journal of Beijing University of Aeronautics and Astronautics

摘　　要：针对碳化材料烧蚀性能参数测量难度大的问题,对基于优化算法的烧蚀性能参数辨识方法进行了研究。根据一维连续模型描述碳化烧蚀材料的内部热响应情况,与公开试验数据进行对比验证,各测量点计算误差均小于15%。采用基函数表征法对材料碳化前后的比热容和导热率进行表征,基函数选取为切比雪夫多项式。根据PICA材料的温度测试试验数据,对材料的热解动力学参数和基函数的待定系数采用遗传算法进行辨识,将辨识得到的材料烧蚀性能参数代入一维连续模型中进行计算,与验证工况下的试验数据进行比对,计算得到的温度曲线平均相对误差小于10%。In response to the difficulty in measuring the ablation performance parameters of thermal protection materials,this paper studies the identification method of ablation performance parameters based on optimization algorithms.The one-dimensional continuous model is used to describe the internal thermal response of carbonization ablation thermal protective materials.Compared with the public experimental data,the calculation error of each measurement point is less than 15%.The basis function characterisation approach uses the Chebyshev polynomial as the basis function to characterize the material’s specific heat capacity and thermal conductivity both before and after carbonization.According to the temperature test experimental data of PICA materials in the public literature,the pyrolysis kinetic parameters of the materials and the undetermined coefficients of the basis function are identified by genetic algorithm,and the parameter identification results are substituted into the one-dimensional continuous model for calculation.Compared with the experimental data in the public literature,the average relative error of the temperature curves under the two verification conditions is less than 10%.

关 键 词：热防护材料 烧蚀性能 参数辨识 优化算法 数值计算 

分 类 号：V250.3[一般工业技术—材料科学与工程]