稠油化学驱多孔介质中乳状液生成及运移规律研究  

Study on formation and migration of emulsions in porous media during chemical flooding of heavy oil

作　　者：马涛[1,2] 肖朴夫 唐亮 伦增珉 唐永强[1,2] 周冰 MA Tao;XIAO Pufu;TANG Liang;LUN Zengmin;TANG Yongqiang;ZHOU Bing(Petroleum Exploration&Production Research Institute,SINOPEC,Beijing City,100083,China;Research and Development Center for the Sustainable Development of Continental Sandstone Mature Oilfield by National Energy Administration,Beijing City,100083,China;Exploration and Development Research Institute,Shengli Oilfield Company,SINOPEC,Dongying City,Shandong Province,257015,China)

机构地区：[1]中国石化石油勘探开发研究院,北京100083 [2]国家能源陆相砂岩老油田持续开采研发中心,北京100083 [3]中国石化胜利油田分公司勘探开发研究院,山东东营257015

出　　处：《油气地质与采收率》2024年第3期156-164,共9页Petroleum Geology and Recovery Efficiency

基　　金：国家自然科学基金企业创新发展联合基金“难采稠油多元热复合高效开发机理与关键技术基础研究”(U20B6003);国家重点研发计划“稠油化学复合冷采基础研究与工业示范”(2018YFA0702400)。

摘　　要：乳化作用是稠油油藏化学驱提高采收率的主要机理之一,稠油在多孔介质中的乳化与油藏温度、驱油剂浓度密切相关。通过乳化实验研究了稠油形成水包油乳状液所需驱油剂的临界乳化浓度与温度的关系,利用高温高压微观可视驱油装置研究了稠油化学驱过程中原油乳化及运移规律。实验结果表明:乳化实验温度越高,原油越易于被乳化,所需的驱油剂的临界乳化浓度越低;当实验温度由30℃增加到90℃,临界乳化浓度下降了90%。稠油化学驱的微观驱油实验过程中,稠油在多孔介质中的乳化过程存在3种模式。在多孔介质中,当驱油剂的浓度小于该温度下稠油乳化所需驱油剂的临界乳化浓度时,稠油乳化模式为原油在喉道处经历卡断分散、运移、聚并;当驱油剂的浓度大于该温度下稠油乳化所需驱油剂的临界乳化浓度时,稠油乳化模式为卡断乳化、运移、再乳化、再运移;当驱油剂的浓度远大于该温度下稠油乳化所需驱油剂的临界乳化浓度时,稠油乳化模式为接触、剥离、运移。因此,开展稠油化学驱时,在控制成本的前提下,尽可能提高驱油剂的浓度,可实现稠油的高效乳化,进而提高采收率。Emulsification is one of the main mechanisms of chemical flooding to enhance oil recovery in heavy oil reservoirs.The emulsification of heavy oil in porous media is closely related to reservoir temperature and oil-displacing agent concentration.The relationship between the critical concentration and temperature of the oil-displacing agent required to form oil in water(O/W)emulsions in heavy oil was studied by emulsification experiment.The emulsification and migration rules of crude oil during chemical flooding of heavy oil were studied by using high-temperature and high-pressure microscopic visual oil displacement devices.The results show that a higher temperature in the emulsification experiment indicates that the crude oil is easier to emulsify,and the critical emulsification concentration of the required oil-displacing agent is lower.The critical emulsification concentration decreases by 90%when the temperature increases from 30℃to 90℃during the experiment.There are three modes of emulsification of heavy oil in porous media during microscopic oil displacement experiments for chemical flooding of heavy oil:the emulsification mode of heavy oil shows dispersion,migration,and coalescence at the throat in porous media when the concentration of the oil-displacing agent is less than the critical emulsification concentration of the oil-displacing agent required for heavy oil emulsification at this temperature;the emulsification mode of heavy oil indicates emulsification,migration,re-emulsification,and re-migration when the concentration of the oil-displacing agent is greater than the critical emulsification concentration of the oil-displacing agent required for heavy oil emulsification at this temperature;the emulsification mode of heavy oil is manifested as contact,stripping,and migration when the concentration of the oil-displacing agent is much larger than the critical emulsification concentration of the oildisplacing agent required for heavy oil emulsification at this temperature.Therefore,the concentration of

关 键 词：稠油 化学驱 乳化 运移 聚并 

分 类 号：TE357[石油与天然气工程—油气田开发工程]