基于MATLAB的外圆磨削工艺参数对过程稳定性的影响分析  

Influence Analysis on Process Stability of Cylindrical Grinding Parameters Based on MATLAB

作　　者：封超 张金峰[2] 王保义 贝广霞 Feng Chao;Zhang Jinfeng;Wang Baoyi;Bei Guangxia(Engineering Training Center,Shandong University of Science and Technology,Qingdao,Shandong 266590,China;College of Mechanical and Electronic Engineering,Shandong University of Science and Technology,Qingdao,Shandong 266590,China;不详)

机构地区：[1]山东科技大学工程实训中心 [2]山东科技大学机电工程学院 [3]济南重工集团有限公司

出　　处：《工具技术》2024年第6期103-109,共7页Tool Engineering

基　　金：国家自然科学基金(11672166);中国博士后科学基金(2016M5922165)。

摘　　要：对比磨削动力学宏观结构,构建非线性动力学微观模型,并推导出磨削非线性动力学方程。利用Faddeev算法对非线性动力学方程进行线性化处理,计算系统特征值并进行稳定性预测,得出影响系统稳定性的因素。基于MATLAB软件绘制出在不同影响因素下变换取值范围获得的稳定图,研究相同参数不同取值出现状态变化过渡期对应的时域响应图和特征值位置图,并得出对比结论。The nonlinear dynamic microscopic model is established by comparing the macroscopic structure of grinding dynamics,and the nonlinear dynamic equation of grinding is deduced.Faddeev algorithm is used to linearize the nonlinear dynamic equation to calculate the system characteristic values,and stability prediction is carried out to obtain the factors affecting the system stability.Based on MATLAB,the stability diagram obtained by transforming the value range under different influence factors is drawn,and the time-domain response diagram and eigenvalue location diagram corresponding to the state change transition period of different values of the same parameter are studied for comparison and conclusions are drawn.

关 键 词：磨削 非线性 方程 特征值 稳定图 

分 类 号：TG58[金属学及工艺—金属切削加工及机床] TH161[机械工程—机械制造及自动化]