基于正交法的超声电火花钻削微小孔最佳加工参数研究  

Research on optimal machining parameters of ultrasonic EDM drilling for micro holes based on orthogonal method

作　　者：刘晋丽 郑文源 LIU Jin-li;ZHEN Wen-yuan(Xi'an Aeronautical Polytechnic Institute,Xi'an 710089,Shaanxi,China;Xi'an Hualei Ship Industry Co.,Ltd,Xi'an 710000,Shaanxi,China)

机构地区：[1]西安航空职业技术学院,陕西西安710089 [2]西安华雷船舶实业有限公司,陕西西安710000

出　　处：《模具技术》2024年第3期64-69,共6页Die and Mould Technology

基　　金：西安航空职业技术学院2020年度科研计划项目《超声电火花复合加工深小孔技术研究》(编号:20XHZK-01)。

摘　　要：采用正交法研究了用于制造微小孔的高速电火花钻孔机的最优工艺参数。使用的工件材质为钛合金,铜电极直径为2.0 mm。选择要优化的参数是:截至脉冲、最大电流和标准电压。采用正交阵列L9分析了以上参数对材料去除率(MRR)和孔径的影响。获得了孔加工工艺的最佳放电加工参数,并通过实验进行了验证。In this paper,the orthogonal method is used in this study to study the optimal technological parameters of high speed electric discharge maching drilling machine for making tiny holes.The workpiece used in this study was made of titanium alloy and the diameter of the copper electrode was 2.O mm.In this experiment,the parameters selected to be optimized are:cut-off pulse,maximum current and standard voltage.Orthogonal array Lg was used to analyze the effects of the above parameters on the material removal rate(MRR)and aperture.The optimum discharge machining parameters of hole machining were obtained and verified by experimental results.

关 键 词：超声电火花复合加工 微小孔 正交法 孔径 材料去除率(MRR) 

分 类 号：TG523[金属学及工艺—金属切削加工及机床]