检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:宗翔 Zong Xiang(Shanghai Municipal Engineering Design Institute(Group)Co,Ltd.,200092,China)
机构地区:[1]上海市政工程设计研究总院(集团)有限公司,200092
出 处:《特种结构》2024年第3期14-19,35,共7页Special Structures
摘 要:在城市地铁隧道施工中常会遇到新建隧道下方穿越已建隧道的情况,提前预测已建隧道沉降是工程实施的关键。本文提出了刚度修正简易计算方法,利用隧道与土体纵向相对刚度,以土体自由变形为基础,建立了已建隧道沉降曲线的沉降槽宽度修正系数和地层损失率修正系数,借此预测已建隧道的沉降发展;并利用数值模拟方法建立了相对刚度与各修正系数的定量关系,实现了刚度修正法的工程应用。然后将刚度修正法计算结果与基于弹性地基梁的解析方法进行了对比,验证了本文方法的可行性和有效性。最后,给出了刚度修正法在工程实例中的应用案例。In urban subway tunnel construction,situations often arise where a newly constructed tunnel in-tersects with an existing tunnel.Accurate prediction of the settlement of the existing tunnel is crucial for suc-cessful project implementation.In this paper,a simplified stiffness correction method is proposed.Based on the longitudinal relative stiffness between the tunnel and the surrounding soil,the settlement trough width correction coefficient and ground loss ratio correction coefficient of the existing tunnel settlement curve are established to predict settlement development.Additionally,numerical simulation method is used to obtain the quantitative re-lationship between relative stiffness and each correction coefficient,facilitating practical engineering applica-tion.Then,the results from the stiffness correction method are compared with those from an analytical method based on an elastic foundation beam to validate the feasibility and effectiveness of the proposed method.At last,an application of the stiffness correction method is presented in a case study.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33