焊剂对焊接熔池液态金属表面张力的影响  

Effect of flux on surface tension of liquid metal in welding pool

作　　者：李春凯[1] 代悦 王嘉昕 顾玉芬[1] 石玗[1] 席保龙 LI Chun-kai;DAI Yue;WANG Jia-xin;GU Yu-fen;SHI Yu;XI Bao-long(State Key Laboratory of Advanced Processing and Reuse of Nonferrous Metals,Lanzhou University of Technology,Lanzhou730050,China)

机构地区：[1]兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室,兰州730050

出　　处：《吉林大学学报（工学版）》2024年第6期1555-1562,共8页Journal of Jilin University:Engineering and Technology Edition

基　　金：国家自然科学基金项目(52365048);甘肃省科技重大专项项目(22ZD6GA008);2024年甘肃省高校科研创新平台重大培育项目(2024CXPT-06)。

摘　　要：基于电弧光谱诊断和熔池振荡原理分别建立了电弧电子温度和熔池液态金属表面张力动态测量系统,研究了3种典型氧化物焊剂对TIG电弧热源作用下熔池表面张力的影响。结果表明:氧化物的引入不会对电弧整体温度产生明显影响,但能够使熔池液态金属平均表面张力温度梯度由负变正,且熔池表面张力温度梯度与氧化物的熔点有关,氧化物熔点越低,熔池的表面张力温度梯度越大。A dynamic measurement system of molten pool liquid metal surface tension was established based on the principle of weld pool oscillation.The effect of three typical oxide fluxes on the surface tension of the molten pool under the action of the TIG arc heat source was investigated.It was found that the introduction of oxides does not have a significant effect on overall arc temperature.However,it would cause the average surface tension temperature gradient of liquid metal in molten pool to change from negative to positive,and the surface tension temperature gradient of molten pool is related to the melting point of the oxide.The lower the oxide melting point,the larger the surface tension temperature gradient of the weld pool.

关 键 词：焊接 熔池表面张力 熔池温度 熔池振荡频率 电弧整体温度 焊剂 

分 类 号：TG444[金属学及工艺—焊接]