检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨猛 王猛 骆星九 张孝强 丁虎[2,3,4] 陈立群 YANG Meng;WANG Meng;LUO Xingjiu;ZHANG Xiaoqiang;DING Hu;CHEN Liqun(PLA Naval Medical Center,Naval Medical University,Shanghai 200433,China;Shanghai Institute of Applied Mathematics andMechanics,Shanghai 200444,China;Shanghai Key Laboratory of Mechanics in Energy Engineering,Shanghai 200444,China;Department of Mechanics,School of Mechanics and Engineering Science,Shanghai University,Shanghai 200444,China)
机构地区:[1]海军军医大学中国人民解放军海军特色医学中心,上海200433 [2]上海市应用数学和力学研究所,上海200444 [3]上海市能源工程力学重点实验室,上海200444 [4]上海大学力学与工程科学学院力学系,上海200444
出 处:《振动与冲击》2024年第16期263-268,共6页Journal of Vibration and Shock
摘 要:首先,将惯容器、阻尼器和弹簧进行组合,设计实现全并联隔振单元,并将其斜向布置,构成新型悬挂式隔振系统;其次,以软件ADAMS与MATLAB联合仿真的方式,构建带有斜向惯容器、阻尼器和弹簧的悬挂式隔振系统以及仅带有斜向阻尼器和弹簧的悬挂式隔振系统的仿真模型,并对两种隔振系统进行对比研究,探讨斜向惯容的作用;然后,针对带有斜向惯容器、阻尼器和弹簧的悬挂式隔振系统的加速度传递特性进行研究,改变隔振系统参数观察传递率曲线变化,并探讨了在ADAMS环境下以数值方法、半数值半模型方法表示惯容结构的可行性;最后,以半数值半模型的方法表示惯容,在随机激励下对带有斜向惯容器、阻尼器和弹簧的悬挂式隔振系统中的惯容施加速度与相对速度、加速度与相对速度、相对加速度与相对速度三种半主动控制方式,探讨不同控制方式对隔振性能的影响。研究结果表明,斜向惯容器可以改善悬挂式隔振系统对低频振动的隔离效果,但会增加高频部分的传递率,相对加速度与相对速度和加速度与相对速度的控制方式可以明显提高悬挂式隔振系统对随机激励的衰减效果。Firstly,the inerter,damper,and spring are combined to design a parallel vibration isolation unit,and they are arranged diagonally to form a new suspension vibration isolation system(SVIS).Secondly,through the joint simulation of ADAMS and MATLAB,simulation models of suspension vibration isolation systems with diagonal inerters,dampers,and springs(SVISIDS),as well as suspension vibration isolation systems with only diagonal dampers and springs,are constructed.A comparative study is conducted on the two types of isolation systems to explore the role of diagonal inerter.Then,the acceleration transmission characteristics of a SVISIDS are studied,and the transmission rate curve is observed by changing the system parameters.The feasibility of using numerical and semi numerical and semi model methods to represent inerter in the ADAMS is explored.Finally,the inerter is represented using a semi numerical and semi model method.Under random excitation,three semi-active control methods,namely velocity and relative velocity,acceleration and relative velocity,and relative acceleration and relative velocity,are applied to the inerter in a SVISIDS.The effects of different control methods on isolation performance are explored.The research results indicate that the diagonal inerter can improve the isolation effect of the SVIS on low-frequency vibration,but it will increase the transmission rate of the high-frequency part.The control method of relative acceleration and relative velocity,as well as the control method of acceleration and relative velocity,can significantly improve the attenuation effect of the SVIS on random excitation.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.70