检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:卢勇 张永民[1] 王昊东 张少杰 邱爱慈[1] LU Yong;ZHANG Yongmin;WANG Haodong;ZHANG Shaojie;QIU Aici(State Key Laboratory of Electrical Insulation and Power Equipment,Xi’an Jiaotong University,Xi’an710049,China)
机构地区:[1]西安交通大学电力设备电器绝缘国家重点实验室,西安710049
出 处:《西安交通大学学报》2024年第9期154-163,共10页Journal of Xi'an Jiaotong University
基 金:国家重点研发计划资助项目(2020YFA0710500)。
摘 要:为解决可控冲击波设备的两间隙气体火花开关在非常规页岩油开发中结构强度不够的问题,提出了一种适用于高静压、有限空间中的气体火花开关结构强度与电场分布同步优化的设计方法。基于有限元模拟与理论分析,评估了50 MPa外部高静压对气体火花开关结构强度的影响,针对结构强度足够的气体火花开关模型,通过高斯定理对开关内部的电场分布进行了优化分析,给出了两电极气体火花开关结构强度与电场分布同步优化的设计方案。研究结果表明:开关结构强度主要与腔室壁厚正相关,而壁厚的增加会提高开关异常放电概率,在特定的壁厚参数下,电极半径存在最佳值使得绝缘子表面电场强度最低。在保证结构强度的前提下,对现有开关电场分布进行了优化分析,优化后的开关间隙电场的不均匀度有轻微提高,而高压绝缘子内、外表面电场强度分别衰减了59.6%与31.0%。通过先增加结构强度、后优化电场分布的方法,实现了对冲击波设备的两电极气体火花开关结构强度与电场分布的同步优化。To solve the problem of insufficient structural strength of two gap gas spark switches for controllable shock wave equipment in unconventional shale oil development,this paper proposes a design method for synchronously optimizing the structural strength and electric field distribution of gas spark switches in high static pressure and limited space.Based on finite element simulation and theoretical analysis,the impact of 50 MPa external high static pressure on the structural strength of the gas spark switch is evaluated.For a gas spark switch model with sufficient structural strength,the electric field distribution inside the switch is optimized and analyzed through Gauss’theorem,leading to a design scheme for synchronously optimizing the structural strength and electric field distribution of a two electrode gas spark switch.The research results indicate that the strength of the switch structure is primarily positively correlated with the chamber wall thickness,and the increase in wall thickness may increase the probability of abnormal discharge of the switch.Under specific wall thickness parameters,there is an optimal value for the electrode radius to make the electric field intensity on the insulator surface the lowest.On the premise of ensuring the structural strength,the existing switch electric field distribution is optimized and analyzed.The optimized switch gap exhibits a slight improvement in the uniformity of the electric field,and the electric field intensity on the inner and outer surfaces of the high-voltage insulator is respectively reduced by 59.6%and 31.0%.By first increasing the structural strength and then optimizing the electric field distribution,synchronous optimization of the structural strength and electric field distribution of the two electrode gas spark switch in shock wave equipment is achieved.
分 类 号:TH162[机械工程—机械制造及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49