筒式永磁联轴器传动特性解析算法及结构优化  

Analytical Algorithm and Structural Optimization of Transmission Characteristics of Cylindrical Permanent Magnet Couplings

作　　者：张嘉睿 何涛[2] 苏桂龙 李阳阳 罗唯奇 程习康 周孟德 张洋[1] 刘巍[1] ZHANG Jiarui;HE Tao;SU Guilong;LI Yangyang;LUO Weiqi;CHENG Xikang;ZHOU Mengde;ZHANG Yang;LIU Wei(School of Mechanical Engineering,Dalian University of Technology,Dalian,116086;Wuhan Second Ship Design and Research Institute,Wuhan,430205)

机构地区：[1]大连理工大学机械工程学院,大连116086 [2]武汉第二船舶设计研究所,武汉430205

出　　处：《中国机械工程》2024年第9期1575-1583,共9页China Mechanical Engineering

基　　金：国家资助博士后研究人员计划(GZC20230357);国家自然科学基金(52305095,52105543,52125504);辽宁省科技计划联合计划(2023011596-JH3/4500,2023JH2/101800026);大连市科技人才创新支持计划(2023RQ099);湖北省自然科学基金创新群体项目(CFA024)。

摘　　要：永磁联轴器存在结构复杂、装配困难、抗偏载能力差等问题,传动性能评估中,有限元仿真计算时间长,解析计算准确性低。为此,设计了新型筒式永磁联轴器构型,梯形磁体与楔形插槽可实现永磁体自吸装配。针对该构型,提出了一种等效磁荷磁路解析计算方法计算传递转矩,并设计了一种吸斥复合永磁联轴器构型。对两种永磁联轴器在内外转子相对偏转0°~45°时的传递转矩、径向相对偏移-3.8~3.8 mm的受力情况进行了仿真及实验验证。研究结果表明,提出的解析算法较仿真结果误差减小50%,且解析计算用时由2 h缩短为2 min。与筒式构型相比,吸斥复合构型的径向偏载最大受力减小48.59%。最后为永磁联轴器设计优化提出了合理化建议。The permanent magnet couplings had problems of complex structure,difficult assembly and poor resistance to eccentric load.In terms of transmission performance evaluation,the finite element simulation calculation took a long time and the analytical calculation accuracy was low.Therefore,a new type of cylindrical permanent magnet coupling configuration was designed.The trapezoidal magnet and the wedge slot may realize the self-priming assembly of permanent magnets.Aiming at this configuration,an equivalent magnetic charge-magnetic circuit analytical calculation method was proposed to calculate the transfer torque and an absorption-repulsion composite permanent magnet coupling configuration was designed.The transfer torques where the relative deflection of inner and outer rotors as 0°~45°and the foces responde to radial relative offset-3.8~3.8 mm of two permanent magnet couplings were simulated and verified by experiments.The results show that the errors of the proposed analytical algorithm decreases 50%than that of the simulation results,and the analytical calculation time is shortened from 2 h to 2 min.Compared with cylindrical configuration,the maximum radial eccentric load of the suction-repulsion composite configuration is as 48.59%.Reasonable suggestions are put forward for design optimization of permanent magnet couplings.

关 键 词：筒式永磁联轴器 构型设计 传递转矩 等效磁荷 

分 类 号：TH133.4[机械工程—机械制造及自动化]