检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:韩雪阳 吴琳 刘志兵[2] 于东玮 孔祥逸 张大勇 HAN Xueyang;WU Lin;LIU Zhibing;YU Dongwei;KONG Xiangyi;ZHANG Dayong(College of Marine Science and Technology,Dalian University of Technology,Panjin 124221,Liaoning,China;China Shipbuilding and Ocean Engineering Design and Research Institute,Shanghai 200021,China;Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian 116023,Liaoning,China;Ningbo Institute of Dalian University of Technology,Ningbo 315000,Zhejiang,China)
机构地区:[1]大连理工大学海洋科学与技术学院,辽宁盘锦124221 [2]中国船舶及海洋工程设计研究院,上海200021 [3]大连理工大学运载工程与力学学部,辽宁大连116023 [4]大连理工大学宁波研究院,浙江宁波315000
出 处:《上海交通大学学报》2024年第11期1687-1697,共11页Journal of Shanghai Jiaotong University
基 金:工信部高技术船舶科研项目(CBG2N21-2-2);中央高校基本科研业务费资助(DUT22QN237)。
摘 要:为解决恶劣极地环境引起的海洋装备防寒问题,工程上通常采用电伴热的方式.采用数值模拟和实验的方法,对电伴热踏步板构件在典型极地环境下热平衡的影响因素进行分析.环境要素为风速和温度,风速为0~40 m/s、温度为-40~0℃.基于数值仿真和实验测试获得电加热踏步板构件在不同风速及温度下的对流换热系数.结果表明,增大风速和降低温度都会增大踏步板的对流换热系数;风速是影响踏步板换热的主要因素,而温度的影响较小.基于实验数据,参考平板构件对流换热的经典理论,建立电加热踏步板构件的对流换热系数预测模型,并采用数值仿真验证该模型的正确性.To solve the problem of cold protection for marine equipment against cold caused by the harsh polar environment,electrical tracing is commonly used in engineering.In this paper,numerical simulation and experimental methods are used to analyze the influencing factors of thermal balance of electric heat tracing tread plate components in typical polar environment with wind speed ranging from O to 40 m/s and temperature ranging from-40℃to 0℃.Based on numerical simulation and experimental test,the convective heat transfer coefficient of electric heating tread plate components at different wind speeds and temperatures is obtained.The results show that increasing wind speed and decreasing temperature will increase the convective heat transfer coefficient of the tread plate.Wind speed is the main factor affecting the heat transfer of the tread plate,while temperature has little effect.Finally,based on the experimental data and the classical theory of convective heat transfer of plate components,a prediction model of convective heat transfer coefficient of electric heating tread plate components is established,and the correctness of the model is verified by numerical simulation.
分 类 号:U662[交通运输工程—船舶及航道工程] TK1[交通运输工程—船舶与海洋工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.19.237.16