检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:卓启越 许新宇 周子超 邹望辉 ZHUO Qiyue;XU Xinyu;ZHOU Zichao;ZOU Wanghui(Changsha University of Science and Technology,Changsha 410114,China)
机构地区:[1]长沙理工大学,湖南长沙410114
出 处:《微电子学与计算机》2024年第12期111-119,共9页Microelectronics & Computer
基 金:湖南省科技创新计划(2023GK2036)。
摘 要:针对因LED导通压降不同而产生的额外功率损耗问题,设计了一种带自适应控制的多通道LED背光驱动控制电路,通过自适应控制,最小化线性电流调节器上的电压。基于0.18μm BCD工艺搭建了一种适用于自适应控制的线性电流调节器,可实现通道电流0~48 mA线性可调,电流分辨率为0.2 mA,不同工艺角以及温度下的全电流范围误差小于0.1%,版图面积为0.504 mm^(2)。仿真结果显示,当通道电流为20 mA时,带自适应控制的三通道LED驱动电路的电源效率为95.2%,其中线性电流调节器的功率损耗降低了74%。Aiming at the problem of additional power loss caused by different LED conduction voltage drop,a multichannel LED backlight drive control circuit with adaptive control is designed.Through adaptive control,the voltage on the linear current regulator is minimized.Based on 0.18μm BCD process,a linear current regulator suitable for adaptive control is built,which can realize linear adjustment of channel current from 0 to 48 mA,and the current resolution is 0.2 mA.At different process angles and temperatures,the error of full current range is less than 0.1%,and the layout area is 0.504 mm^(2).The simulation results show that when the channel current is 20 mA,the power efficiency of the three-channel LED drive circuit with adaptive control is 95.2%,and the power loss of the linear current regulator is reduced by 74%.
分 类 号:TN432[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7