检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王志东 陈晨阳 刘晓明 WANG Zhidong;CHEN Chenyang;LIU Xiaoming(Jiangyin Xi Neng Industry Company Limited,Jiangyin Jiangsu 214400,China;Jiangyin Power Grid Company Limited,Jiangyin Jiangsu 214400,China)
机构地区:[1]江阴市锡能实业有限公司,江苏江阴214400 [2]国网江阴市供电公司,江苏江阴214400
出 处:《图学学报》2025年第1期28-34,共7页Journal of Graphics
摘 要:在全介质自承式(ADSS)通信光缆缺陷检测领域,针对跨尺度的电腐蚀缺陷做检测存在计算量要求高、检测精度低的问题,提出了一种改进YOLOv8的ADSS通信光缆缺陷检测方法。首先,对自建通信光缆缺陷数据集切片,防止光缆存在的电腐蚀缺陷在缩放的过程中丢失;其次,使用LS-FPN的结构代替传统的颈部结构,保留通道维度中的有利位置信息,解决光缆表面的缺陷尺度跨度问题的同时提高定位缺陷能力;再者,引用了可变形卷积的思想,对原有backbone网络的卷积进行替换,使得网络在特征提取的过程中能够更为关注周围缺陷信息;最后,用Focus-MPDIoU损失函数代替原有的CIoU,Focus-MPDIoU在处理边界情况时表现优异,能够避免过于偏激的损失梯度。实验结果表明,该方法在ADSS通信光缆缺陷数据集上进行实验验证,改进后的模型分别在mAP50-95和mAP50上达到50.6%和87.8%,相比YOLOv8n分别提升了2.1%和3.7%。同时,计算量GFLOPs降低至6.8,参数量降低至1.96 M,降低了检测设备的配置要求,贴近轻量化的工业需求。In the field of defect detection of all dielectric self supporting(ADSS)communication cables,the detection of galvanic corrosion defects across scales has the problems of high computational demands and low detection accuracy.In this paper,a defect detection method for ADSS communication cables with improved YOLOv8 was proposed.Firstly,the self-built communication cable defect dataset was sliced to prevent the existence of galvanic corrosion defects in the fiber optic cable from being lost in the process of scaling;secondly,the structure of LS-FPN replaced the traditional necking structure,retaining the favorable positional information in the channel dimension,which resolved the defective scale-spanning problem on the surface of the fiber optic cable while enhancing defect localization capability;furthermore,the idea of deformable convolution was introduced,replacing the convolution in the original backbone network,allowing the network to better focus on the surrounding defect information in the process of feature extraction;finally,the original CIoU was replaced by the Focus-MPDIoU loss function,which excels in handling boundary cases and avoids overly radical loss gradients.The experimental results validated that the method on the ADSS communication fiber optic cable defect dataset,with the improved model achieving 50.6%and 87.8%on mAP50-95 and mAP50,respectively,reflecting increases of 2.1%and 3.7%compared to YOLOv8n.Meanwhile,the computational GFLOPs were reduced to 6.8 and the number of parameters decreased to 1.96 M,reducing the configuration requirements of the inspection equipment and meeting the lightweight industrial demand.
关 键 词:轻量化 YOLOv8n 通信光缆 缺陷检测 MPDIoU
分 类 号:TP391.41[自动化与计算机技术—计算机应用技术] TN913.33[自动化与计算机技术—计算机科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198