基于Creo的圆盘承重分析  

Bearing Analysis of Disc Based on Creo

作　　者：张晓飞 于荣鹏 董腾中 ZHANG Xiao-fei;YU Rong-peng;DONG Teng-zhong(Jiangsu Newamstar Packaging Machinery Co.,Ltd.,Suzhou 215600,China)

机构地区：[1]江苏新美星包装机械股份有限公司,江苏苏州215600

出　　处：《饮料工业》2024年第6期58-61,共4页Beverage Industry

摘　　要：在机械工程应用的广泛领域中,一个看似不相关的主题——纸盘承重却在应用中起到重要作用。饮料机械中的吹瓶机、灌装机的机架支撑部布局和纸盘承重相类似,因此可以通过研究纸盘承重的问题来指导工程应用中机架支撑分布。为了获得同重量同高度支撑部的最大承载量,构造了5种不同数量支撑部且同数量支撑部各3种尺寸的方案。采用Creo软件对不同方案分别建模、分配材料、施加载荷和约束,进行静力学分析,并获得各方案应力及位移云图。通过对比可知:采用4根支撑部且内径为∅16mm、外径为∅29.9mm时最大应力最小;各方案最大位移相差较小,在60μm以内。研究可以为相应机械结构的设计提供思路,减少实验次数并大幅度缩短设计开发周期,具有较高的工程应用价值。In the broad field of mechanical engineering applications,a seemingly unrelated topic-paper plate bearing,but cleverly intertwined with it.The layout of the frame support part of the blowing machine and the filling machine in the beverage machinery is similar to the bearing capacity of the paper plate,so the research on the bearing capacity of the paper plate can guide the distribution of the frame support in engineering applications.In order to obtain the maximum bearing capacity of support parts with the same weight and height,five kinds of support parts with different numbers and three sizes of each support part were constructed.Creo software was used to modeling,distributing materials,applying load and constraint to different schemes,carrying out static analysis,and obtaining the stress and displacement nephogram of each scheme.By comparison,it could be seen that the maximum stress was minimum when four support parts were used and the inner diameter was∅16mm and the outer diameter was∅29.9mm.The maximum displacement difference of each scheme was less than 60μm.The research can provide ideas for the design of corresponding mechanical structures,reduce the number of tests and greatly shorten the design and development cycle,and has high engineering application value.

关 键 词：饮料机械 静力学 应力云图 位移云图 工程应用 

分 类 号：TS203[轻工技术与工程—食品科学]