浮体耐波性及系泊实验教学设计与实践  

Experimental Design and Practice of Floating Seakeeping and Mooring Teaching

作　　者：宋磊[1,2] 余铁男[1,2] 孙明慧 刘曾 孙江龙 SONG Lei;YU Tienan;SUN Minghui;LIU Zeng;SUN Jianglong(School of Naval Architecture and Ocean Engineering,Huazhong University of Science and Technology,Wuhan 430074,China;Hubei Provincial Engineering Research Center of Data Techniques and Supporting Software for Ships,Huazhong University of Science and Technology,Wuhan 430074,China)

机构地区：[1]华中科技大学船舶与海洋工程学院,武汉430074 [2]华中科技大学船舶数据技术与支撑软件湖北省工程研究中心,武汉430074

出　　处：《实验室研究与探索》2025年第2期123-126,共4页Research and Exploration In Laboratory

基　　金：国家自然科学基金面上项目(12072126,12472243);华中科技大学教学研究项目(2022061,2024080);华中科技大学实验技术研究项目(202314001)。

摘　　要：充分利用船模拖曳水池条件,以600 mm×250 mm×250 mm方形浮体为教学模型,配合光学运动捕捉装置,开展不同迎浪角下零速横浪规则波运动响应实验教学;采用直杆和重物基座模拟系泊桩,调节缆绳系泊高度测量不同系泊状态下拉力响应,对比分析有/无系泊状态下波浪运动响应情况,完成系泊实验教学。By making full use of the conditions of the towing pool of the ship model,a 600 mm×250 mm×250 mm square floating body is used as the teaching model,and the optical motion capture device is used to carry out the experimental teaching of the regular wave motion response of zero-speed cross-wave under different wave angles.The mooring pile is simulated by using the straight rod and the weight base,the tensile response under different mooring states is measured by adjusting the mooring height of the rope,and the wave motion response with or without mooring is compared and analyzed,so as to complete the mooring experiment teaching.

关 键 词：拖曳水池 耐波性实验教学 系泊实验教学 

分 类 号：G420[文化科学—课程与教学论]