FRW阻燃中密度纤维板的性能及其制板工艺  

Properties and Pressing Variables of Medium Density Fiberboard (MDF) with FRW Fire Retardant

作　　者：刘迎涛[1] 李坚[1] 王清文[1] 

机构地区：[1]东北林业大学,哈尔滨150040

出　　处：《东北林业大学学报》2003年第2期4-5,共2页Journal of Northeast Forestry University

基　　金：国家自然科学基金项目 (批准号 :39970 595);国家"948"项目(96 - 4 - 38/ 39);黑龙江省攻关项目 (JC0 1A2 1 50 )的部分内容

摘　　要：采用干法中密度纤维板的生产工艺 ,研制FRW阻燃中密度纤维板。通过正交试验 ,对其各项性能进行了测试和分析 ,以确定最佳制板工艺条件 ,同时讨论和分析了FRW阻燃剂对FRW阻燃中密度纤维板的物理力学和阻燃性能的影响。FRW阻燃中密度纤维板最佳制板工艺条件为 :胶粘剂用量 15 %、阻燃剂用量 11%、热压温度 175℃、热压时间 6 .5min。FRW阻燃中密度纤维板的物理力学性能可达到国家一级品标准 ,阻燃性能可达JISD 132 2 - 77阻燃一级标准。In this paper, the physical and mechanical properties of FRW fire-retardant medium density fiberboard (MDF) by the cloy process with FRW fire retardant were researched. The effect of FRW fire retardant on physiomechanical and fire resistance of FRW fire-retardant MDF was reflected, and then, based on analysis, the optimum pressing variables of FRW fire-retardant MDF was obtained. Through experiments, the optimum pressing variables of MDF with FRW fire retardant were found: resin content is 15%, FRW fire retardant content 11%, pressing temperature 175℃,pressing time 6.5 min. The physical and mechanical properties of FRW fire-retardant MDF reach the first class of GB, and its fire-retarding properties is also the first class of JISD 1322-77.

关 键 词：FRW阻烯中密度纤维板 FRW阻燃剂 制板工艺条件 

分 类 号：TS653[轻工技术与工程]