三种通道形面下PSR热性能的比较分析  

Comparatie analysis of thermal performance of primary surface recuperator with three kinds of channel shape

作　　者：程惠尔[1] 杨静[1] 

机构地区：[1]上海交通大学机械与动力工程学院,上海200030

出　　处：《燃气轮机技术》2003年第1期57-60,共4页Gas Turbine Technology

基　　金：国家重点基础研究发展规划基金项目(G19999022303);海装十五预先研究项目(No.401010301)资助

摘　　要：以3 7MW燃气轮机为背景,根据已有的微小通道试验数据和理论,对椭圆、正弦波和抛物线三种形面波纹通道的PSR热性能作了对比计算和分析。结果表明,在同样波高2b及波宽2a时,上述三种形面中的正弦波形通道相对具有较大的传热效果和可以接受的压降损失。影响PSR热性能的重要因素不是几何形状而可能是几何尺寸,这对PSR通道形面的设计及其优化目标函数的认定有重要价值。According to the existed experimental data and theory of flow and heat transfer in small channels,the thermal performance of PSR with three kinds of channel shape,namely ellipse curve corrugation;sine curve corrugation and parabola curve corrugation,are comparatively calculated and analyzed based on a 3.7MW gas turbine.The result shows that among the above 3 kinds of channel shape,sine curve channel has a little higher heat transfer effect and acceptable pressure loss under the same corrugation heigh b and corrugation width a.It is not geometry structure but probably geometry sizes that affect the thermal performance of PSR.Therefore,the analysis and calculation are much valuable to the design of PSR channel shape and the cognizance of its optimization object function.

关 键 词：一次表面回热器 通道形面 热性能 

分 类 号：TK124[动力工程及工程热物理—工程热物理]