聚合物阵列波导光栅复用器关键技术的研究  

Research on Key Technique for a Polymeric Arrayed Waveguide Grating Multiplexer

作　　者：赵禹[1] 马春生[1] 张大明[1] 陈开鑫[1] 王菲[1] 崔占臣[2] 刘式墉[1] 衣茂斌[1] 

机构地区：[1]吉林大学实验区,集成光电子国家重点实验室,长春130023 [2]吉林大学化学学院,长春130023

出　　处：《光子学报》2003年第4期417-420,共4页Acta Photonica Sinica

基　　金：国家重点基础研究发展规划 (G2 0 0 0 0 3 660 4);国家自然科学基金 (60 1770 2 2 )资助项目

摘　　要：介绍了阵列波导光栅 (AWG)复用器的工作原理 ;运用光栅衍射理论和马卡提里近似法 ,对中心波长为 1.5 5 μm ,波长间隔为 1.6nm的聚合物AWG进行参量设计 ,通过数值模拟验证了设计的正确性 用甲基丙烯酸甲酯类聚合物对AWG的制备工艺进行了研究 ,用铝作掩模制作了聚合物光波导 ,测试结果表明在 1.5 5The principle of arrayed waveguide grating multiplexer was described;some important parameters were designed with the theory of grating diffraction and Marcatili method and proved by simulation .The epoxypropyl methylacrylate-co-methyl methacrylate were adopted to go on the reseach on the fabricated technology for polymeric AWG.The AWG optical waveguides were fabricated with aluminum as mask and the measured results indicate that the single-mode transmission was achieved for 1.55 μm wavelength.

关 键 词：聚合物阵列波导光栅复用器 工作原理 参量设计 数值模拟 聚合物光波导 单模传输 光纤通信 铝掩膜 

分 类 号：TN25[电子电信—物理电子学] TN929.11