斜齿半离合器的数控加工编程  

NC Programming for Machining the Slanting-Tooth Semi-Clutch

作　　者：肖良红[1] 杨湘军[1] 涂浩[1] 杨世平[1] 胡自化[1] 

机构地区：[1]湘潭大学先进制造技术研究所,湖南湘潭411105

出　　处：《机械工程师》2003年第4期22-23,共2页Mechanical Engineer

摘　　要：编写了铣削加工斜齿半离合器的数控子程序和主程序,在配有FANUC-OMD系统的数控铣床XK714/1上加工出斜齿半离合器的4个齿,使受力面及螺旋面上的每条切削刃均位于轴剖面上,表面质量好。文中对类似零件的数控加工编程具有借鉴意义。The NC subprogram and main program for milling the slanting-tooth semi-clutch have been compiled.Four teeth of the slanting-tooth semi-clutch have been manufactured on the NC milling machine XK714/1which is equipped with FANUC-OMD numerical control system.Each knife-edge cutting on the pressing planes and on the helical surfaces lies on the axial section-plane and the cutting surfaces have good quality.This paper can primely guide NC programming for machining the similar parts.

关 键 词：斜齿半离合器 数控加工 轴剖面 数控编程 

分 类 号：TG659[金属学及工艺—金属切削加工及机床] TP311.1[自动化与计算机技术—计算机软件与理论]