25mm厚窿缘桉地板坯料干燥工艺的研究  

Research on Drying Technology of 25mm Thickness E. exsrta F.V.M.Lumber

作　　者：杜国兴[1] 顾炼百[1] 钟争登[1] 

机构地区：[1]南京林业大学干燥技术研究所,南京210037

出　　处：《林产工业》2003年第2期22-23,共2页China Forest Products Industry

摘　　要：对25mm厚窿缘桉地板坯料的干燥工艺进行了研究,结果表明,本文提出的桉木干燥工艺是可行的;从初含水率30.4％干燥到终含水率9;;3％,干燥周期为15d;终含水率的均匀性好,从而为人工材桉木的利用开辟了新的途径。25mm thickness E.exserta F.V.M.drying technology was researched.The research results showed that total drying time was 15 days from initial moisture content 30.4% to final moisture content 9.3%,quality of the dryed lumber was good:no check,little residual stresses and even final moisture content.

关 键 词：窿缘桉 地板坯料 干燥工艺 厚材 桉木 

分 类 号：TS652[轻工技术与工程]