基于ADAMS技术的DGSY25型吊管机设计问题的研究  

A Study of Design Problems for Model DGSY25 Pipe-hoist Machine Based on ADAMS Technique

作　　者：王金刚[1] 李浩东[1] 李长河[2] 常云霞[1] 

机构地区：[1]河北工业大学,300130 [2]天津建筑机械厂

出　　处：《工程机械》2003年第8期29-31,共3页Construction Machinery and Equipment

摘　　要：使用UG软件设计了DGSY25型吊管机,并用ADAMS软件对配重固定和随动两种情况进行了运动学仿真。仿真结果显示,配重固定不动时,结构简单,成本低,但安全性差;配重与吊臂联动时,安全性大为提高,但需要传感器实时测出起重量和吊臂角度,使得整车的结构复杂,成本上升。Model DGSY25 pipe-hoist machine is designed with UG software and kinetic simulation is performed for fixed and trailed ballast with ADAMS software. The simulation result sows that with ballast fixed and stationary, the structure is simple and cost is low but safety is not satisfactory; and with ballast moving with the hoist boom, safety is greatly enhanced, but sensors are required to measure the weight and the boom angle so that the structure becomes complicate and the cost is high.

关 键 词：吊管机 DGSY25型 配量 ADAMS 运动仿真 工程机械 UG软件 

分 类 号：TH21[机械工程—机械制造及自动化]