检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:梁帮立[1] 王志功[1] 田俊[1,2] 夏春晓[1] 章丽[1] 熊明珍[1]
机构地区:[1]东南大学射频与光电集成电路研究所 [2]南京大学物理系,南京210093
出 处:《Journal of Semiconductors》2003年第10期1021-1024,共4页半导体学报(英文版)
基 金:国家杰出青年基金资助项目 (批准号 :6 982 5 10 1)~~
摘 要:Using native CMOS technology,EDA tool,and adopting full-custom design methodology,a laser diode driver for the use of STM-1 and STM-4 optical access network,is realized by CSMC-HJ 0.6μm CMOS technology to modulate laser diodes at 155Mb/s (STM-1),622Mb/s (STM-4) with adjustable modulation current from 0 to 50mA for an equivalent 50Ω load.The maximum modulation voltage is over 2.5V pp corresponding to a 3V DC bias for output stage.The time range of rise and fall from 360ps to 471ps is measured from the output voltage pulse.The RMS jitter is no more than 30ps for four bit rates.The power consumption is less than 410mW under a power supply voltage of 5V.According to the experimental results,the laser diode driver achieves the same level as their counterparts worldwide.基于国内的CMOS技术和EDA工具以及全定制的设计方法 ,采用无锡华晶上华 (CSMC HJ) 0 6 μmCMOS技术实现了可工作于 15 5Mb/s、6 2 2Mb/s的激光驱动器 .该激光驱动器在 5 0Ω负载上输出电流摆幅从 0到 5 0mA可调 .在输出级 3V直流偏置时最大输出电压摆幅可达 2 5Vpp.输出电压脉冲的上升、下降时间分别小于 471ps和 44 4ps.四个工作速率下均方根抖动都小于 30ps.电路在 5V单电源供电时功耗小于 410mW .芯片测试结果表明 ,该激光驱动器达到了世界同类集成电路的水平 .
关 键 词:laser diode driver CMOS optical access networks
分 类 号:TN249[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222