检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵艳春[1] 倪洪启[1] 朱成实[1] 张金萍[1] 罗鹏[1]
机构地区:[1]沈阳化工学院,辽宁沈阳110142
出 处:《沈阳化工学院学报》2003年第4期278-280,共3页Journal of Shenyang Institute of Chemical Technolgy
摘 要: 在进行工件轮廓加工时,若数控机床不具有刀具半径补偿功能,则在编程时确定刀具中心的轨迹较为困难.因此现代机床均具有刀具半径补偿功能.根据检索,目前国内各期刊均简单地说明刀具应进行偏置,对于命令的实际编程没有详细说明.根据实际操作结果及查阅的资料,对具有半径补偿时的刀具中心实际运行轨迹进行归纳,对于理解数控程序及在数控机床上进行工件装夹具有一定好处.It will be very difficult to define the tool path if the machine you are using without tool radius compensation when it machine the outline of a workpiece. So most machines have tool radius compensation at present. According to the result of literature searching,all the domestic journal simply introduced tools must deviate from the workpiece outline,but they did not tell how to use the order in actual program. On the base of results of process and collected materials, tool actual path was inducted in this article.This will be beneficial to understand NC program and hold workpiece on NC machines.
分 类 号:TP273[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.70