Microstructure and properties after deformation and aging process of A286 superalloy  

作　　者：Si-Cheng Liu Yun Gao Zhong-Liang Lin Shuang-Shuang Guo Xiao-Bin Zhang Xiao-Jian Yin 

机构地区：[1]Research Institute of Aerospace Precision Products Co.,Ltd

出　　处：《Rare Metals》2019年第9期864-870,共7页稀有金属（英文版）

基　　金：financially supported by the National Natural Science Foundation of China(No. 11502285)

摘　　要：This study focuses on the effects of different cold-drawing deformations and aging treatments of solid solution A286 superalloy.The grain configuration,texture,precipitates and tensile strength of A286 superalloy after different deformations and aging treatments were investigated by optical microscopy(OM),field emission scanning electron microscopy(FESEM),electron back-scattered diffraction(EBSD)and mechanical testing machine.The grain size and configuration of A286 alloy can hardly be changed during aging process.The initially equiaxial and twinned crystals are obvious when deformation is less than30%,while the grain boundaries become blurry and slip bands appear after 35% deformation or more.γ’ phase and Cr-rich carbide are the precipitates of A286 alloy.For each deformation,γ’ phase plays a major role during aging and its amount increases gradually when the aging temperature changes from 650 to 680℃,and a maximum tensile strength appears when following two-stage aging.With deformation increasing,the amounts of γ’ phase and Crrich carbide increase in varying degrees.Meanwhile,the<111>wire textures become more obvious,the tensile strength is enhanced and the kernel average misorientation(KAM)increases gradually;the higher KAM of crystal lattices diffuses from the grain boundary to the matrix gradually.This study focuses on the effects of different cold-drawing deformations and aging treatments of solid solution A286 superalloy.The grain configuration,texture,precipitates and tensile strength of A286 superalloy after different deformations and aging treatments were investigated by optical microscopy(OM),field emission scanning electron microscopy(FESEM),electron back-scattered diffraction(EBSD)and mechanical testing machine.The grain size and configuration of A286 alloy can hardly be changed during aging process.The initially equiaxial and twinned crystals are obvious when deformation is less than30%,while the grain boundaries become blurry and slip bands appear after 35% deformation or more.γ’ phase and Cr-rich carbide are the precipitates of A286 alloy.For each deformation,γ’ phase plays a major role during aging and its amount increases gradually when the aging temperature changes from 650 to 680℃,and a maximum tensile strength appears when following two-stage aging.With deformation increasing,the amounts of γ’ phase and Crrich carbide increase in varying degrees.Meanwhile,the<111>wire textures become more obvious,the tensile strength is enhanced and the kernel average misorientation(KAM)increases gradually;the higher KAM of crystal lattices diffuses from the grain boundary to the matrix gradually.

关 键 词：A286 alloy DEFORMATION AGING PRECIPITATE Texture TENSILE strength 

分 类 号：TG156.92[金属学及工艺—热处理] TG146.15[金属学及工艺—金属学]