基于RTX64的激光目标模拟系统实时控制软件设计  

Design of real-time control software for laser target simulation system based on RTX64

作　　者：黄战华[1] 刘堃 王敏[2] 郭景辉 HUANG Zhanhua;LIU Kun;WANG Min;GUO Jinghui(Key Laboratory of Optoelectronic Information Technology(Ministry of Education),School of Precision Instrument and Optoelectronic Engineering,Tianjin University,Tianjin 300072,China;Tianjin Polytechnic University,Tianjin 300387,China)

机构地区：[1]天津大学精密仪器与光电子工程学院光电信息技术教育部重点实验室,天津300072 [2]天津工业大学,天津300387

出　　处：《应用光学》2019年第2期186-192,共7页Journal of Applied Optics

基　　金：国家自然科学基金(61475113)

摘　　要：为满足搭载平面反射镜的高精度二轴机械转台为核心的激光点目标球幕投影系统仿真目标点的时间精度与位置精度要求,提出在具有高实时性和时间精度的RTX (real-time extension)64实时扩展系统环境下开发和运行的计算机控制软件的设计方案。使用实时CAN总线通信与以太网结合的通信控制方法,实现各子系统之间的数据通信和协同控制,提升运动目标模拟的位置精度和时间精度。在20ms的同步控制时钟周期下,重复实验中模拟目标点的误差最大值分别为0.005 34°与0.004 04°,符合激光点目标球幕投影系统的模拟精度要求,证明该实时控制软件的设计方案可行。In order to satisfy the time and position accuracy requirements of the simulated target point for the laser spot target dome projection system which takes the high-precision two-axis mechanical turret with a planar mirror as the core,a design scheme of computerized control software that running in RTX64 real-time extended system environment with high real-time and time accuracy.This design scheme combines the real-time controller area network(CAN)bus with Ethernet to realize data communication and cooperative control among subsystems.Meanwhile,the position accuracy and the time accuracy of moving target simulation are effectively improved.Keep the clock synchronization period 20 ms,in the experiment,the maximum errors of the simulated target point are 0.005 34°and 0.004 04°,respectively.The errors meet the simulation precision requirement of the laser point target spherical screen projection system,which proves that the design scheme of the real-time control software is feasible.

关 键 词：仿真技术 实时系统 软件设计 目标模拟 球幕投影 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术]