X波段雷达重复频率(PRF)设计  

A PRF Design Method for X-band Radar

作　　者：徐绵起[1] 李侠[2] 朱剑平[2] 

机构地区：[1]94981部队 [2]空军雷达学院系统工程系

出　　处：《现代雷达》2004年第3期14-17,共4页Modern Radar

摘　　要：雷达信号处理的根本目的是从杂波中提取运动目标 ,本文从杂波有效抑制的角度对X波段测高雷达进行PRF设计。对设计结果的分析表明 ,X波段雷达采用中脉冲重复频率PD体制 ,信杂比改善因子增大 ,有利于云雨杂波背景下目标信号的检测 ;同时 ,虽然增加了距离解模糊电路 ,但可以省去脉冲压缩电路 。This key aim of radar sigal processing is to extract moving target from clutter.From the viewpoint of clutter depression,this paper describes the PRF design of X-band height-finding radar.The analysis of the design result shows that by using the medium-PRF PD system in X-band radar,the improvement factor of S/C will be increased and it is benefical to the target signal detection in cloud or rain clutter.At the same time,although the distance de-ambiguity circuit should be added in this scheme, the pulse compression circuit can be left out,so the comprehensive performance will be increased significantly.

关 键 词：X波段 雷达 重复频率 PRF 设计 信号处理 改善因子 

分 类 号：TN958[电子电信—信号与信息处理]