牙制备体形态对计算机辅助设计与辅助制作全瓷底层冠适合性的影响  

The effect of tooth preparation design on the CAD/CAM all-ceramic coping crown′s fitness

作　　者：赵云凤[1] 王华蓉[1] 李勇[1] 

机构地区：[1]四川大学华西口腔医学院修复科,成都610041

出　　处：《中华口腔医学杂志》2003年第5期330-332,共3页Chinese Journal of Stomatology

基　　金：国家自然科学基金资助项目 (3 9970 799)

摘　　要：目的　研究牙制备体形态对计算机辅助设计与辅助制作 (computeraideddesign computeraidedmanufacture ,CAD CAM )全瓷底层冠适合性的影响。方法　将牙制备体设计成不同的向聚合度和边缘形态 ,采用MC切削陶瓷经Cerec2CAD CAM系统加工制作成全瓷底层冠 ,粘结于制备体上。采用体视显微镜测试全瓷底层冠边缘、肩台、轴面和面的适合性。结果　当向聚合度为 2 0°时 ,全瓷底层冠的适合性最好 (10 1 7～ 12 7 9) μm ;边缘形态对底层冠边缘和肩台的适合性有影响 (P <0 0 5 ) ,凹面型者适合性较好。当牙制备体设计为 2 0°聚合度、边缘形态为凹面型时 ,全瓷底层冠的边缘适合性为 (40 1± 11 8) μm。 结论　临床制作CAD CAM全瓷底层冠时 ,建议牙制备体设计成 2Objective To Study the effect of tooth preparation design on fitness of CAD/CAM all-ceramic coping crown. Methods The tooth preparation comprised 2 types of occlusal convergence (10°、20°), 2 margin forms (shoulder、chamfer). The MC coping were milled by Cerec 2 CAD/CAM system, cemented,embedded, sectioned, and measurd at 10 sites to obtain the data of margin、shoulder、axial surface、occlusal surface fitness. Results The coping′s fitness was influenced by convergence angle and margin form. The coping′s fitness was very nice (101.7 ～ 127.9)μm when the coping with 20°occlusal conveygence angle. Those coping with 20°occlusal convergence and chamfer margin in tooth preparation provided the best fitness, its cement film thickness in margin was (40.1±11.8)μm. Conclusions The 20°occlusal convergence and chamfer margin can be used for CAD/CAM all-ceramic crown in clinical application.

关 键 词：牙制备体 计算机辅助设计 计算机辅助制作 CAD-CAM 全瓷底层冠 适合性 牙修复体 

分 类 号：R783.2[医药卫生—口腔医学]