检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张丽仙[1] 赵铱民[1] 邵龙泉[1] 苏方[1] 刘嘉[1] 李明勇[1]
出 处:《实用口腔医学杂志》2003年第3期251-253,共3页Journal of Practical Stomatology
基 金:江苏省重点实验室开放课题资助 (编号 :K2 0 1 4 )
摘 要:目的 :找出色差值△E =1.5时 ,SY 1硅橡胶的无限光学厚度。方法 :应用美能达CS 32 1便携式色差仪测试SY 1硅橡胶不同厚度 ( 0 .5~ 10mm )时在标准黑、白板上的色差值 ,利用对数回归方程计算出当△E =1.5时SY 1硅橡胶的厚度。结果 :SY 1硅橡胶的无限光学厚度值 (△E =1.5时 )为 7.60mm。结论 :当覆盖赝复体内部固位支架表面上的硅橡胶厚度小于无限光学厚度时 。Objective: To find out the infinity optical thickness of SY-1 silicone elastomers when color difference(△E) is equal to 1.5 . Methods: Silicone elastomer samples with thickness from 0.5 mm to 10 mm of SY-1 silicone elastomer were measured by CIE-1976-L *a *b * relative to CIE source against a white and a black background by using Minolta colorimeter . Color difference was calculated as △E=[(△L *) 2+( △a *) 2+(△b *) 2] 1/2 . The infinity optical thickness of SY-1 silicone elastomer when △E=1.5 was calculated by regression formulation. Result: When △E was equal to 1.5, the infinity optical thickness of SY-1 silicone elastomer was 7.60 mm. Conclusion: In order to get ideal effect the supports should be treated with colorant when the thickness of silicone elastomer covering the surface of supports in maxillofacial prostheses is thinner than 7.60 mm.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.70