用嵌入式实时系统构建电火花加工智能电源  

Use embedded real-time system to build intelligent EDM power supply

作　　者：罗逸苇[1] 张立强[1] 王斌修[1] 

机构地区：[1]青岛建筑工程学院机械系,山东青岛266033

出　　处：《电加工与模具》2004年第2期13-15,共3页Electromachining & Mould

摘　　要：介绍了脉冲电源和嵌入式实时系统相结合构造的电火花加工智能电源的特点 ,分析了这种智能电源所需要的基本硬件和软件 ,同时还简要介绍了几种嵌入式处理器、嵌入式实时操作系统以及相应的实时控制软件的开发平台。最后总结了用嵌入式实时系统构建电火花加工智能电源的基本步骤和注意事项 。The property of EDM power supply, embedded system, and intelligent EDM power supply with embedded real time system was discussed at the beginning of this paper. Then, the elementary compose hardware and software of this intelligent power was analyzed, several embedded CPUs and embedded real time operator systems was introduced at the same time. The steps and cautions of how to make up an intelligent power were summed up at end of the paper. A further studying was to enhance the common electrical discharge machinery machine or to design new machine with this intelligent power.

关 键 词：电火花加工 智能电源 嵌入式系统 实时操作系统 脉冲电源 

分 类 号：TG661[金属学及工艺—金属切削加工及机床]