检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]上海隧道工程有限公司盾构工程分公司,上海 [2]同济大学土木工程学院地下建筑与工程系,上海
出 处:《地球科学前沿(汉斯)》2024年第4期437-444,共8页Advances in Geosciences
摘 要:盾构隧道具有扰动小,适应性强等特点,因此广泛应用于城市交通基础设施建设。在实际施工过程中,隧道开挖引起的衬砌上浮和地表隆起现象明显。而在浅覆土开挖下,超大直径盾构隧道施工引起的扰动将更加显著。因此,本文依托上海北横通道项目的超大直径盾构开挖区间案例,建立精细化三维数值模型,通过对比数值模拟结果和监测结果验证了模拟方法的可靠性。在此基础上展开参数分析,探究了超大直径开挖下隧道上浮和地表隆起的机理,以及覆土厚度和注浆压力分对地表隆起的影响。研究结论对类似的浅覆土超大直径盾构隧道施工具有一定的参考和借鉴意义。Shield tunnels are characterized by small disturbance and strong adaptability, so they are widely used in the construction of urban transportation infrastructure. In the actual construction process, the lining uplift and surface uplift caused by tunnel excavation are obvious. Under shallow overburden excavation, the disturbance caused by the construction of super-large diameter shield tunnel will be more significant. Therefore, this paper relies on the case of super-large-diameter shield excavation interval of Shanghai Beiheng Expressway Passage Project to establish a refined three-dimensional numerical model, and verifies the reliability of the simulation method by comparing the numerical simulation results with the monitoring results. On this basis, the parameter analysis is carried out to investigate the mechanism of tunnel uplift and surface heave under super-large diameter excavation, and the influence of overburden thickness and grouting pressure on surface heave. The conclusions of the study have certain reference and significance for the construction of similar shallow overburden super-large diameter shield tunnels.
分 类 号:U45[建筑科学—桥梁与隧道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38