The Influence of Abrasive Pretreatment on Hot Air Drying of Grape  

作　　者：Giuseppina Adiletta Wijitha Senadeera Loredana Liguori Alessio Crescitelli Donatella Albanese Paola Russo 

机构地区：[1]Department of Industrial Engineering, University of Salerno, Fisciano, Italy [2]School of Chemistry Physics and Mechanical Engineering, Faculty of Science and Engineering, Queensland University of Technology, Brisbane, Australia [3]Institute for Microelectronics and Microsystems, Napoli, Italy [4]Department of Chemical Engineering Materials Environment, University of Rome “La Sapienza”, Roma, Italy

出　　处：《Food and Nutrition Sciences》2015年第3期355-364,共10页食品与营养科学（英文）

摘　　要：The drying of grapes is a more complex process compared to the dehydration of other agricultural materials due to the necessity of a pretreatment operation prior to drying. Grape drying to produce raisins is a very slow process, due to the peculiar structure of grape peel, that is covered by a waxy layer. Its removal has been so far carried out by using several chemical pre-treatments. However, they cause heterogeneity in the waxes removal and create microscopic cracks. In this paper an abrasive pretreatment for enhancing the drying rate and preserving the grape samples is proposed. Two cultivars of grape were investigated: Regina white grape and Red Globe red grape. The drying kinetics of untreated and treated samples were studied using a convective oven at 50°C. Fruit quality parameters such as sugar and organic acid contents, shrinkage, texture, peel damage (i.e. by SEM analysis) and rehydration capacity were studied to evaluate the effectiveness of abrasive pretreatment on raisins. Abrasive pretreatment contributed to reduce drying time and rehydration time. The treated and untreated dried grapes were significantly different (p < 0.05) in sugar and in tartaric acid content. On the contrary, no significant differences (p < 0.05) in malic and citric acids and in texture properties between untreated and treated samples were observed.The drying of grapes is a more complex process compared to the dehydration of other agricultural materials due to the necessity of a pretreatment operation prior to drying. Grape drying to produce raisins is a very slow process, due to the peculiar structure of grape peel, that is covered by a waxy layer. Its removal has been so far carried out by using several chemical pre-treatments. However, they cause heterogeneity in the waxes removal and create microscopic cracks. In this paper an abrasive pretreatment for enhancing the drying rate and preserving the grape samples is proposed. Two cultivars of grape were investigated: Regina white grape and Red Globe red grape. The drying kinetics of untreated and treated samples were studied using a convective oven at 50°C. Fruit quality parameters such as sugar and organic acid contents, shrinkage, texture, peel damage (i.e. by SEM analysis) and rehydration capacity were studied to evaluate the effectiveness of abrasive pretreatment on raisins. Abrasive pretreatment contributed to reduce drying time and rehydration time. The treated and untreated dried grapes were significantly different (p < 0.05) in sugar and in tartaric acid content. On the contrary, no significant differences (p < 0.05) in malic and citric acids and in texture properties between untreated and treated samples were observed.

关 键 词：GRAPE Drying RAISIN ABRASIVE PRETREATMENT SUGAR Content Shrinkage Texture REHYDRATION 

分 类 号：R73[医药卫生—肿瘤]