Study on the Properties of UHMW-PE Film  

作　　者：Zhongyan Du Jihu Wang Shaoguo Wen Pengzhu Wang Dongdong Zhang Changle Yin 

机构地区：[1]College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai, China

出　　处：《Advances in Materials Physics and Chemistry》2015年第8期337-343,共7页材料物理与化学进展（英文）

摘　　要：Some physicochemical properties of UHMW-PE film such as gas permeability, tensile strength, and corrosion resistance in acid with different immersion time, various concentrations and various solutions and rattler testing were studied. The obtained results showed that the values of gas permeability, tensile strength, elongation at break, and the temperature of dissociation at weight loss 5% was 546.57 cm3·m﹣2·24 h·0.1 MPa, 37.22 MPa, 368.00%, 360°C, respectively. In different concentration acid, the surface resistance of film accumulated to some extent with immersion time increasing, together with that the higher acid concentration was, the lower the surface resistance of film was. Moreover, the contact angle of films gradually increased with the acid concentration decreasing and the increase of immersion time. After wear testing, the mass of UHMW-PE film did not nearly change, while the contact angle became larger with the number of turning increasing and the value was more than 90°.Some physicochemical properties of UHMW-PE film such as gas permeability, tensile strength, and corrosion resistance in acid with different immersion time, various concentrations and various solutions and rattler testing were studied. The obtained results showed that the values of gas permeability, tensile strength, elongation at break, and the temperature of dissociation at weight loss 5% was 546.57 cm3·m﹣2·24 h·0.1 MPa, 37.22 MPa, 368.00%, 360°C, respectively. In different concentration acid, the surface resistance of film accumulated to some extent with immersion time increasing, together with that the higher acid concentration was, the lower the surface resistance of film was. Moreover, the contact angle of films gradually increased with the acid concentration decreasing and the increase of immersion time. After wear testing, the mass of UHMW-PE film did not nearly change, while the contact angle became larger with the number of turning increasing and the value was more than 90°.

关 键 词：UHMW-PE Film SURFACE MODIFICATION SURFACE Resistance CONTACT ANGLE 

分 类 号：R73[医药卫生—肿瘤]