Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds  

作　　者：J. O. Olawale S. A. Ibitoye K.M. Oluwasegun M. D. Shittu R. C. Ofoezie 

机构地区：[1]Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria

出　　处：《Journal of Minerals and Materials Characterization and Engineering》2012年第9期891-895,共5页矿物质和材料特性和工程（英文）

摘　　要：This investigation was conducted to correlate process variables in shielded metal-arc welding (SMAW) and post weld heat treatment on some mechanical properties of low carbon steel weld. Three hundred and sixty pieces of weld samples were prepared. The samples were welded together using AWS E6013 electrodes with DC arc welding process. Varying welding currents of 100 A, 120 A, 140 A were used with a terminal voltage of 80 V. The weld samples were prepared for hardness, tensile and impact test. The prepared samples were then subjected to normalising heat treatment operation at temperatures of 590°C, 600°C, 620°C, 640°C, 660°C, 680°C, and 700°C. It was observed that increase in welding current led to an increase in hardness and ultimate tensile strength values of as-weld samples while impact strength de-creases. After post heat treatment operation the hardness and ultimate tensile strengths decreases while impact strength increases. From this outcome we conclude that there is correlation between the welding current and mechanical proper-ties of weld metal on one hand and normalising temperatures and mechanical properties on the other hand. As the cur-rent increases the hardness and strength increases but impact strength reduces, while hardness and strength continuously reduces but impact strength increases as normalising temperatures increases.This investigation was conducted to correlate process variables in shielded metal-arc welding (SMAW) and post weld heat treatment on some mechanical properties of low carbon steel weld. Three hundred and sixty pieces of weld samples were prepared. The samples were welded together using AWS E6013 electrodes with DC arc welding process. Varying welding currents of 100 A, 120 A, 140 A were used with a terminal voltage of 80 V. The weld samples were prepared for hardness, tensile and impact test. The prepared samples were then subjected to normalising heat treatment operation at temperatures of 590°C, 600°C, 620°C, 640°C, 660°C, 680°C, and 700°C. It was observed that increase in welding current led to an increase in hardness and ultimate tensile strength values of as-weld samples while impact strength de-creases. After post heat treatment operation the hardness and ultimate tensile strengths decreases while impact strength increases. From this outcome we conclude that there is correlation between the welding current and mechanical proper-ties of weld metal on one hand and normalising temperatures and mechanical properties on the other hand. As the cur-rent increases the hardness and strength increases but impact strength reduces, while hardness and strength continuously reduces but impact strength increases as normalising temperatures increases.

关 键 词：Post-Welding Normalising Current Steel HARDNESS STRENGTH 

分 类 号：R73[医药卫生—肿瘤]