检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:Ajibo Augustine Igboeli Chukwudi Ani Cosmas
机构地区:[1]Department of Electronic Engineering, University of Nigeria Nsukka, Enugu, Nigeria
出 处:《International Journal of Communications, Network and System Sciences》2015年第10期399-407,共9页通讯、网络与系统学国际期刊(英文)
摘 要:Asynchronous Transfer Mode (ATM) has been recommended and has been accepted by industry as the transfer mode for Broadband network. Currently, large scale effort has been undertaken both in the industry and academic environment to design and build high speed ATM networks for corporate bodies. These networks are meant to support both real-time and non-real time applications with different quality of service (QoS) requirements. The resources to support the applications QoS requirements are typically limited and therefore the need to dynamically allocate resource in a fair manner becomes inevitable. In this work, an evaluation is carried out on the performance of enterprise-wide network that its backbone is based on leased trunk. The performance of the leased trunk is evaluated when loaded with homogeneous and heterogeneous traffic. The evaluation is carried out in order to determine the exact effect of traffic overload on resources-trunk transmission capacity and buffer. The aim is to define the optimum loading level and the associated QoS parameter values. A typical network was adopted, modeled and simulated in MATLAB environment by using Simulink tool and the results obtained were analyzed by using Microsoft Excel.Asynchronous Transfer Mode (ATM) has been recommended and has been accepted by industry as the transfer mode for Broadband network. Currently, large scale effort has been undertaken both in the industry and academic environment to design and build high speed ATM networks for corporate bodies. These networks are meant to support both real-time and non-real time applications with different quality of service (QoS) requirements. The resources to support the applications QoS requirements are typically limited and therefore the need to dynamically allocate resource in a fair manner becomes inevitable. In this work, an evaluation is carried out on the performance of enterprise-wide network that its backbone is based on leased trunk. The performance of the leased trunk is evaluated when loaded with homogeneous and heterogeneous traffic. The evaluation is carried out in order to determine the exact effect of traffic overload on resources-trunk transmission capacity and buffer. The aim is to define the optimum loading level and the associated QoS parameter values. A typical network was adopted, modeled and simulated in MATLAB environment by using Simulink tool and the results obtained were analyzed by using Microsoft Excel.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.166