Broad Band Microstrip Patch Antenna Based on Foam-Filled and One Open Slot on Backward of Radiating Layer  

作　　者：Ali Esseid Almuzwghi Lail Brian 

机构地区：[1]Department of Computer Engineering and Science, Florida Institute of Technology, Melbourne, FL, USA

出　　处：《Journal of Computer and Communications》2019年第6期15-28,共14页电脑和通信（英文）

摘　　要：A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric constant is within the lower end of the range. The proposed antenna has been designed for electromagnetic analysis including the impedance bandwidth, reflection coefficient, radiation pattern, and antenna gain. The open slot is loaded on the back radiated layer, which is perpendicular to the radiating edge of the oblong microstrip patch component, where the symmetric line feed is selected. This new technique used to increase the bandwidth and the gain of antenna through increasing current path by slot location, width and length on backward of radiating Layer. The main structure in this research was a single microstrip patch antenna planar with three layers operating at two resonant frequencies 4.440 GHz and 5.833 GHz. All the simulated results are confirmed by two packages of electromagnetism simulation. An impedance bandwidth (S11 ≤ ?10 dB) up to about 41.03% and 30.61% is achieved by individually optimizing its parameters. The antenna exhibits nearly stable radiation pattern with a maximum gains of 8.789 dBi and 9.966 dBi, which is suitable for Wi-Fi Band, satellite communications, and wireless presented. Whereas the results before this design that we have a proof of publication are 36.17% and 28.43%.A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric constant is within the lower end of the range. The proposed antenna has been designed for electromagnetic analysis including the impedance bandwidth, reflection coefficient, radiation pattern, and antenna gain. The open slot is loaded on the back radiated layer, which is perpendicular to the radiating edge of the oblong microstrip patch component, where the symmetric line feed is selected. This new technique used to increase the bandwidth and the gain of antenna through increasing current path by slot location, width and length on backward of radiating Layer. The main structure in this research was a single microstrip patch antenna planar with three layers operating at two resonant frequencies 4.440 GHz and 5.833 GHz. All the simulated results are confirmed by two packages of electromagnetism simulation. An impedance bandwidth (S11 ≤ ?10 dB) up to about 41.03% and 30.61% is achieved by individually optimizing its parameters. The antenna exhibits nearly stable radiation pattern with a maximum gains of 8.789 dBi and 9.966 dBi, which is suitable for Wi-Fi Band, satellite communications, and wireless presented. Whereas the results before this design that we have a proof of publication are 36.17% and 28.43%.

关 键 词：BROAD Band Foam ONE OPEN SLOT Three Layers Two PACKAGES Electromagnetism Simulation 

分 类 号：R73[医药卫生—肿瘤]