国家自然科学基金(51175431)

作品数:20被引量:53H指数:4
导出分析报告
相关作者:姚泽坤秦春郭鸿镇宁永权张东亚更多>>
相关机构:西北工业大学中航工业北京航空材料研究院首都航天机械公司中国运载火箭技术研究院更多>>
相关期刊:《锻压技术》《金属热处理》《焊接学报》《热加工工艺》更多>>
相关主题:TC11双合金等温锻造显微组织MICROSTRUCTURE更多>>
相关领域:金属学及工艺一般工业技术化学工程更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Hot deformation behavior and processing parameter optimization of BT25y alloy with an initial equiaxed microstructure using processing map被引量:2
《Rare Metals》2018年第9期778-788,共11页Xue-Mei Yang Hong-Zhen Guo Ze-Kun Yao Shi-Chong Yuan She-Wei Xin 
financially supported by the National Natural Science Foundation of China (No.51175431)
The high-temperature plastic deformation behavior of BT25y alloy with an initial equiaxed microstructure was investigated by hot compression tests. Processing maps were established to evaluate the power dissipation ef...
关键词:BT25y alloy Hot deformation Processingmap Microstructural evolution 
热暴露对TC11/Ti-22Al-25Nb双合金盘力学性能的影响被引量:3
《稀有金属材料与工程》2018年第8期2511-2517,共7页申景园 姚泽坤 宁永权 邹书亮 
国家自然科学基金(51175431)
对电子束焊+近等温成形的TC11/Ti-22Al-25Nb双合金模拟盘在热暴露后进行拉伸、持久试验,并通过SEM和TEM观察断口形貌及组织。结果表明:热暴露后的试样在室温拉伸时,均断裂在焊缝位置。经550℃热暴露后室温拉伸试样的断裂属于延性断裂,60...
关键词:热暴露 TC11/Ti-22Al-25Nb双合金 力学性能 组织 
固溶和时效处理对粗晶Ti-22Al-25Nb合金显微组织的影响被引量:2
《热加工工艺》2018年第14期208-212,共5页周伟 姚泽坤 马震 
国家自然科学基金项目(51175431)
通过一系列固溶和时效热处理试验,研究了不同温度和时间对粗晶Ti-22Al-25Nb合金组织显微组织演变的影响。结果表明:在(O+B2)相温度区间进行固溶时,随着温度的升高,合金的O相含量逐渐增加,尺寸逐渐变大,在外观形态上由针状逐渐长大...
关键词:TI-22AL-25NB合金 显微组织 固溶 时效 
等温锻造应变速率对Ti60/Ti-22Al-25Nb双合金焊件组织及性能的影响
《热加工工艺》2017年第15期33-37,共5页张菁丽 郭鸿镇 姚泽坤 杨雪梅 
国家自然科学基金项目(51175431)
通过等温锻造对Ti60/Ti-22Al-25Nb双合金焊件焊接界面进行了强化,研究了应变速率对等温锻造过程中母材和焊接接头组织的影响,并对锻后和热处理后的双合金件进行了室温力学性能测试。结果表明,经等温锻造后,焊缝原始粗大枝晶被破碎并发...
关键词:等温锻造 焊缝强化 Ti60钛合金 TI-22AL-25NB合金 
热处理制度对Ti-22Al-25Nb/Ti60双合金焊接接头组织与性能的影响被引量:2
《金属热处理》2016年第8期85-88,共4页郭凡 郭鸿镇 王国庆 叶茂 孟令博 姜枫 刘昀 
国家自然科学基金(51175431)
研究了锻后不同热处理制度对Ti-22Al-25Nb/Ti60双合金焊接接头显微组织和力学性能的影响。结果表明:Ti-22Al-25Nb/Ti60双合金试样经不同工艺热处理后焊缝组织得到不同程度的细化,强度和塑性均得到提高。热处理制度为990℃×1 h,AC+750℃...
关键词:Ti-22Al-25Nb/Ti60双合金 热处理制度 显微组织 力学性能 
Hot deformation behavior and process parameter optimization of Ti22Al25Nb using processing map被引量:5
《Rare Metals》2016年第1期118-126,共9页Jing-Li Zhang Hong-Zhen Guo Hou-Quan Liang 
financially supported by the National Natural Science Foundation of China(No.51175431)
The hot deformation behavior of Ti22A125 Nb was investigated by hot compression test.The flow stressstrain curves can be divided into two types:conventional dynamic recrystallization(DRX) and discontinuous DRX.The ...
关键词:Ti22Al25Nb INTERMETALLIC Processing map Hot deformation behavior MICROSTRUCTURE 
退火对Ti-22Al-25Nb/TC11电子束焊接接头组织与拉伸性能的影响被引量:3
《金属热处理》2015年第8期106-109,共4页葛苗苗 姚泽坤 涂唯坚 郭鸿镇 
国家自然科学基金(51175431)
研究退火对电子束焊接Ti-22Al-25Nb/TC11接头组织和拉伸性能的影响。结果表明,在TC11侧热影响区,出现针状α相;而在Ti-22Al-25Nb侧热影响区,出现少量的α2相和O相;经过退火处理后焊缝区缺陷有小幅度改善,沿晶界出现了细小的点状和针状...
关键词:Ti-22Al-25Nb/TC11合金 退火处理 显微组织 力学性能 电子束焊接 
Hot deformation behavior of TC11/Ti-22Al-25Nb dual-alloy in isothermal compression被引量:7
《Transactions of Nonferrous Metals Society of China》2015年第7期2195-2205,共11页秦春 姚泽坤 宁永权 石志峰 郭鸿镇 
Project(51175431)supported by the National Natural Science Foundation of China
The high-temperature flow behavior of TCll/Ti-22Al-25 Nb electron beam(EB) weldments was investigated by the isothermal compression tests at the temperature of 900-1060℃ and the strain rate of 0.001-10 s-(-1).Bas...
关键词:dual-alloy hot deformation processing map apparent activation energy MICROSTRUCTURE 
热处理对Ti-22Al-25Nb/TC11双合金焊接接头组织与性能的影响被引量:7
《金属热处理》2015年第7期20-24,共5页罗鑫 姚泽坤 秦春 葛苗苗 淡佳鹏 郭鸿镇 
国家自然科学基金(51175431)
对经近等温锻造后的Ti-22Al-25Nb/TC11双合金电子束焊接接头进行了梯度热处理与双重热处理,采用OM、TEM观察了Ti-22Al-25Nb/TC11双合金接头界面组织,并对其室温性能进行了对比分析。结果表明,梯度热处理后双合金接头Ti-22Al-25Nb基体析...
关键词:双合金 近等温锻造 梯度热处理 双重热处理 
Effect of hot working on microstructure and mechanical properties of TC11/Ti_2AlNb dual-alloy joint welded by electron beam welding process被引量:3
《Transactions of Nonferrous Metals Society of China》2014年第11期3500-3508,共9页秦春 姚泽坤 李誉之 宁永权 郭鸿镇 
Project(51175431)supported by the National Natural Science Foundation of China
The influence of hot working on the microstructures of TC11/Ti2 Al Nb dual-alloy joints welded by electron beam welding(EBW) process was investigated. The tensile tests were performed at room temperature for specimens...
关键词:hot working titanium alloy mechanical properties thermal stability electron beam welding 
检索报告 对象比较 聚类工具 使用帮助 返回顶部