国家自然科学基金(21174074)

作品数:11被引量:44H指数:5
导出分析报告
相关作者:贺爱华邵华锋刘晨光更多>>
相关机构:青岛科技大学黄河三角洲京博化工研究院有限公司更多>>
相关期刊:《高分子学报》《Chinese Journal of Polymer Science》《高分子材料科学与工程》《中国塑料》更多>>
相关主题:聚丁烯-1POLYBUTENE-1合金力学性能INDUCED更多>>
相关领域:化学工程理学一般工业技术更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
全同聚丁烯-1注塑成型参数对力学性能和结晶形态的影响被引量:3
《高分子材料科学与工程》2018年第10期105-109,共5页张跃发 孙照博 邵华锋 
泰山学者工程专项经费资助;国家自然科学基金资助项目(21174074);山东省重点研发计划(2015GGX102019);山东省自然科学基金资助项目(ZR2013BM004);山东省自然科学杰出青年基金资助项目(JQ201213);黄河三角洲学者工程专项经费资助(中国石油大学国家大学科技园管委会办公室);中国科学院工程塑料重点实验室(化学研究所)开放课题
全同立构聚丁烯-1(i PB)根据加工条件的不同,在冷却结晶时会形成复杂的多晶结构和形貌。在注射成型加工过程中,i PB的结晶过程是在高的注射压力下进行的非等温流动诱导结晶。文中研究了注射成型的模具温度、注射压力及保压压力对i PB力...
关键词:全同立构聚丁烯-1 注射成型 力学性能 结晶 取向 
聚丁烯及聚丁烯合金的溶液等温结晶行为研究被引量:3
《高分子学报》2018年第6期765-772,共8页邹义 刘晨光 贺爱华 
山东省重点项目研发计划(项目号2015GGX102019);国家自然科学基金(基金号21174074);泰山学者工程资助项目
研究了聚丁烯-1(PB-1)及聚丁烯合金(PBA)中PB-1的溶液等温结晶行为.测定了PB-1在正庚烷溶剂中的溶解度曲线,采用膨胀计法研究了PB-1和PBA中PB-1组分的溶液等温结晶动力学.研究发现,等温结晶温度的升高会降低PB-1的结晶速率,但不影响PB-...
关键词:聚丁烯 聚丁烯合金 溶解度 溶液结晶 等温结晶动力学 
不同相对分子质量PP对iPB-1/PP共混物性能的影响被引量:6
《中国塑料》2017年第9期56-61,共6页肖玮佳 刘晨光 
国家自然科学基金(21174074);泰山学者工程专项经费;山东省重点研发计划(2015GGX 102019)
采用熔融共混法制备了高全同聚丁烯-1(iPB-1)/聚丙烯(PP)共混物,研究了PP的重均相对分子质量和质量分数对iPB-1/PP共混物的力学性能及结晶性能的影响。结果表明,PP的相对分子质量及质量分数的增加对iPB-1的结晶温度、相对结晶度影响不大...
关键词:聚丁烯-1 聚丙烯 共混 力学性能 结晶性能 
Solvent Vapor Annealing Induced Polymorphic Transformation of Polybutene-1被引量:12
《Chinese Journal of Polymer Science》2016年第9期1141-1149,共9页hua-feng shao ya-ping ma 聂华荣 贺爱华 
financially supported by the Special Foundation of Taishan Mountain Scholar Constructive Program;the National Natural Science Foundation of China(No.21174074);Shandong Provincical Key R&D Program(No.2015GGX102019);Shandong Provincial Natural Science Fund for Distinguished Young Scholars(No.JQ201213);the Nature Science Foundation of Shandong Province(No.ZR2013BM004);the Yellow River Delta Scholar program(Office of National University Science&Technology Park Administrative Committee(China University of Petroleum))
Solvent annealing is a facile method for changing the aggregated microstructure and physical properties of polymer materials. In this paper, we addressed the effects of solvent vapor annealing, including chloroform an...
关键词:POLYBUTENE-1 Crystal transformation Solvent vapor annealing. 
高压静电纺丝制备聚丁烯-1纤维的形貌及晶型转变被引量:5
《高分子材料科学与工程》2016年第8期86-92,共7页马亚萍 邵华锋 贺爱华 
泰山学者工程专项经费资助;国家自然科学基金资助项目(21174074);山东省重点研发计划(2015GGX102019);山东省自然科学基金资助项目(ZR2013BM004);山东省自然科学杰出青年基金(JQ201213);黄河三角洲学者工程专项经费资助(中国石油大学国家大学科技园管委会办公室)
对聚丁烯-1的环己烷溶液进行高压静电纺丝制备出聚丁烯微纳米纤维,通过光学显微镜、扫描电镜、傅里叶变换红外光谱和X射线衍射等表征手段,考察了纺丝液浓度、纺丝电压、推进速率对纤维形貌的影响,并对纺丝过程及室温陈放的聚丁烯纤维的...
关键词:聚丁烯-1 高压静电纺丝 晶型转变 纤维 形貌 
Fabrication and Chemical Crosslinking of Electrospun Trans-polyisoprene Nanofiber Nonwoven被引量:2
《Chinese Journal of Polymer Science》2016年第6期697-708,共12页hua-rong nie chao wang 贺爱华 
financially supported by the National Basic Research Program of China(No.2015CB654700(2015CB654706));the National Natural Science Foundation of China(Nos.51473083 and 21174074);Special Foundation of Taishan Mountain Scholar Constructive Program;Shandong Provincial Key R&D program(No.2015GGX102019);Shandong Provincial Natural Science Fund for Distinguished Young Scholars(No.JQ201213);the Yellow River Delta Scholar program(Office of National University Science&Technology Park Administrative Committee(China University of Petroleum))
In this work, the optimal electrospinning conditions of trans-polyisoprene (TPI) solutions were evaluated nevertheless its lower glass transition temperature than the room temperature. Subsequently, chemical crossli...
关键词:TRANS-1 4-POLYISOPRENE Electrospun nanofibers GELATIN VULCANIZATION Chemical crosslinking. 
聚1-丁烯釜内合金的微观结构及其对性能的影响被引量:2
《化学世界》2016年第5期261-264,共4页马亚萍 李兰阁 邵华锋 贺爱华 
泰山学者工程专项经费资助;国家自然科学基金(No.21174074);山东省重点研发计划(2015GGX102019);山东省自然科学基金(No.ZR2013BM004);山东省自然科学杰出青年基金(No.JQ201213);黄河三角洲学者工程专项经费资助(中国石油大学国家大学科技园管委会办公室)
对采用TiCl_4/MgCl_2-A1Et3体系制备的聚1-丁烯釜内合金的微观结构进行了表征,通过核磁共振碳谱结果计算出聚1-丁烯釜内合金中丙烯结构单元的含量。差示扫描热仪(DSC)分析表明,丙烯结构单元增加可使聚1-丁烯釜内合金从熔体中冷却结晶时...
关键词:聚1-丁烯 釜内合金 差示扫描热仪(DSC) 力学性能 
Linear Viscoelastic Behaviors of Polybutene-1 Melts with Various Structure Parameters
《Chinese Journal of Polymer Science》2016年第2期174-184,共11页Hua-feng Shao Shu-lei Wang Xia Dong 贺爱华 
financially supported by the National Basic Research Program of China(No.2015CB654700(2015CB654706));Special Foundation of Taishan Mountain Scholar Constructive Program;National Key Technology R&D Program of China(No.2011BAE26B05);Shandong Provincial Natural Science Fund for Distinguished Young Scholars(No.JQ201213);the National Natural Science Foundation of China(No.21174074);the Nature Science Foundation of Shandong Province(No.ZR2013BM004);Shandong province science and technology development plan(2012GGA05042);support from the Yellow River Delta Scholar program(Office of National University Science&Technology Park Administrative Committee(China University of Petroleum)
The effects of weight-average molecular (Mw), molecular weight distribution (MWD), and isotacticity on the linear viscoelastic behavior of polybutene-1 melts are studied. It is observed that the linear viscoelasti...
关键词:POLYBUTENE-1 Molecular weight Molecular weight distribution ISOTACTICITY Linear viscoelastic behaviors. 
聚烯烃合金的研究进展(Ⅱ)--分级方法、结构调控与性能被引量:11
《高分子通报》2016年第1期9-16,共8页姜柏羽 刘振学 贺爱华 
国家973计划Grant No.2015CB654700(2015CB654706);国家科技支撑计划重点项目课题(2011BAE26B05);国家自然科学基金项目(21174074,51473083);山东省自然科学杰出青年基金(JQ201213);山东省自然科学基金(ZR2013BM004);山东省重点研发计划(2015GGX102019);泰山学者工程专项经费资助;黄河三角洲学者工程专项经费资助(中国石油大学国家大学科技技园管委会办公室)
聚烯烃合金是通过釜内聚合制备的多组成的聚烯烃材料。本文分别从聚烯烃合金的分级方法、组分和性能等方面对聚烯烃合金结构与性能进行了评述,重点介绍了溶剂抽提分级法、温度梯度分级法、升温淋洗分级法、等温热分级法和逐步结晶分级...
关键词:聚烯烃合金 分级 表征 性能 
Synthesis and Characterization of trans-1,4-Butadiene/Isoprene Copolymers: Determination of Monomer Reactivity Ratios and Temperature Dependence被引量:9
《Chinese Journal of Polymer Science》2014年第8期1068-1076,共9页Qing-fei Zhang Xiu-bo Jiang 贺爱华 
financially supported by the National Key Technology R&D Program of China(No.2011BAE26B05);the Shandong Province Natural Science Fund for Distinguished Young Scholars(No.JQ201213);National Natural Science Foundation of China(No.21174074);Shandong Province Science and Technology Development Plan(No.2012GGA05042);the Major Projects of Independent Innovation Achievements Transformation in Shandong Province(No.2013ZHZX1A0207)
A series of trans-1,4-butadiene/isoprene copolymers were prepared using the catalyst system TiCl4/MgCl2-Al(i- Bu)3 with bulk precipitation technology at different temperatures. Monomers reactivity ratios were calcul...
关键词:trans-1 4- ISOPRENE BUTADIENE COPOLYMER Reactivity ratio. 
检索报告 对象比较 聚类工具 使用帮助 返回顶部