国家自然科学基金(51261020)

作品数:11被引量:40H指数:5
导出分析报告
相关作者:鲁世强欧阳德来崔霞董显娟杜海明更多>>
相关机构:南昌航空大学江西师范大学钢铁研究总院武汉科技大学更多>>
相关期刊:《热加工工艺》《失效分析与预防》《Transactions of Nonferrous Metals Society of China》《稀有金属材料与工程》更多>>
相关主题:TIALLOYTA15钛合金BEHAVIOR片层组织更多>>
相关领域:金属学及工艺一般工业技术航空宇航科学技术更多>>
-

检索结果分析

结果分析中...
条 记 录,以下是1-10
视图:
排序:
Grain growth behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy during isothermal β heat treatments被引量:7
《Rare Metals》2019年第3期233-237,共5页De-Lai Ouyang Hai-Ming Du Xia Cui Shi-Qiang Lu Xian-Juan Dong 
financially supported by the National Natural Science Foundation of China (No. 51261020);the Aeronautical Science Foundation of China(No. 2014ZE56015);the Educational Committee of Jiangxi Province of China(No. GJJ14505)
Isothermal β heat treatments of Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si alloy were performed at the temperature of1040-1240 ℃ to examine the influence of heating conditions on grain growth of the alloy. The results show that...
关键词:ISOTHERMAL heating Ti-6.5Al-3.5Mo-1.5Zr-0.3Si ALLOY GRAIN growth Model 
β转变组织TA15钛合金塑性流动失稳行为被引量:5
《稀有金属材料与工程》2018年第5期1485-1491,共7页董显娟 鲁世强 王克鲁 欧阳德来 
国家自然科学基金(51261020);航空科学基金(2014ZE56015);江西省教育厅科学技术项目(GJJ150734)
采用THERMECMASTOR-Z型热模拟实验机对魏氏和网篮2种β转变组织TA15钛合金在温度750~950℃、应变速率0.001~10s^(-1)范围进行等温恒应变速率压缩实验。结果表明,2种β转变组织钛合金在低温(750~880℃)和高应变速率(0.0032~10s^(-1))范...
关键词:β转变组织 流动失稳 局部流动带 原始β晶粒边界 等轴化 
基于m值高效法的TA15合金超塑性变形
《中国有色金属学报》2017年第4期716-723,共8页孙前江 王高潮 
国家自然科学基金资助项目(51261020);江西省自然科学基金资助项目(20142BAB206021);江西省教育厅科技项目(GJJ150735);轻合金加工科学与技术国防重点学科实验室基金资助项目(gf201501006)~~
对TA15合金在拉伸试验机上进行应变速率敏感因子(m值)高效超塑性变形试验,研究合金的超塑性性能和显微组织。结果表明:在780~950℃变形时,TA15合金呈现出良好的超塑性能;900℃变形时,该合金的超塑性能最好,m值达到0.62,最大伸长率为128...
关键词:TA15合金 超塑性 M值 显微组织 
β热处理工艺对Ti-6Al-2Zr-1Mo-1V钛合金片层组织演变的影响被引量:8
《材料热处理学报》2016年第12期42-46,共5页欧阳德来 杜海明 鲁世强 崔霞 董显娟 
国家自然科学基金(51261020);航空科学基金(2014ZE56015);轻合金加工科学与技术国防重点学科实验室(GF201401007)
利用可控冷却速度热处理装置对Ti-6Al-2Zr-1Mo-1V合金进行了β热处理实验,并研究了该合金原始β晶粒尺寸和冷却速度对片层组织的影响。结果表明,原始β晶界是α片层的主要形核地点,原始β晶粒内可形成多个α集束团,同一α集束内α片层...
关键词:Ti-6Al-2Zr-1Mo-1V钛合金 β热处理工艺 片层组织 
TSCR流程Ti微合金化超高强钢的第二相析出行为研究被引量:3
《热加工工艺》2016年第23期32-35,共4页陈麒琳 毛新平 孙新军 杜海明 
国家自然科学基金项目(51261020);国家轻合金加工重点实验室项目(gf201401007)
利用Gleeble-1500D模拟机进行了Ti微合金钢的热模拟试验,研究了其在薄板坯连铸连轧(TSCR)流程下Ti(C,N)沉淀析出行为。结果表明,Ti微合金钢在TSCR流程中存在两类含Ti析出物:正方形的或矩形的TiN和球形或不规则形状TiC。TiN析出物主要在...
关键词:TSCR流程 TI微合金钢 Ti(C N)析出物 
Deformation Behavior of Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo-0.35Si-0.85Nd Alloy in β/Quasi-β Forging Process被引量:1
《Journal of Iron and Steel Research International》2016年第12期1297-1302,共6页Ke-lu WANG Shi-qiang LU Xian-juan DONG Xin LI De-lai OUYANG 
Item Sponsored by National Natural Science Foundation of China(51164030,51261020);Education Commission Foundation of Jiangxi Province of China(GJJ13501)
The hot deformation behavior of Ti 5.6Al-4.8Sn-2.0Zr-1.0Mo 0.35Si 0.85Nd alloy in β/quasi-β forging process was studied using isothermal compression tests over temperature range from 1040℃ to 1 100 ℃ and strain ra...
关键词:titanium alloy β/quasi-β forging deformation behavior processing map process parametersoptim ization 
冷却速率对TA15钛合金组织和性能的影响被引量:2
《失效分析与预防》2016年第4期208-211,217,共5页崔霞 贾鹏程 杜海明 欧阳德来 
国家自然科学基金(51261020);江西省教育厅科技项目(GJJ14505)
利用可控冷却速率热处理装置对TA15钛合金进行了不同冷却速率下的β热处理工艺试验,研究了该合金冷却速率对微观组织和硬度的影响。结果表明:合金加热至1 020℃以上以不同冷却速率冷却后出现了两种类型的转变产物——马氏体和(α+β)片...
关键词:TA15钛合金 冷却速率 微观组织 硬度 
Dynamic spheroidization kinetics behavior of Ti-6.5Al-2Zr-1Mo-1V alloy with lamellar microstructure被引量:6
《Transactions of Nonferrous Metals Society of China》2016年第5期1301-1309,共9页董显娟 鲁世强 郑海忠 
Project(2014ZE56015)supported by Aeronautical Science Foundation of China;Project(51261020)supported by the National Natural Science Foundation of China;Project(Zk201001004)supported by the Open Fund of the Aeronautical Science and Technology Key Laboratory of Aeronautical Material Hot Processing Technology,China
Abstract: The dynamic spheroidization kinetics behavior of Ti-6.5Al-2Zr-1Mo-1V alloy with a lamellar initial microstructure was studied by isothermal hot compression tests in the temperature range of 750-950℃ and st...
关键词:titanium alloy lamellar microstructure SPHEROIDIZATION kinetics equation 
Dynamic recrystallization behavior of burn resistant titanium alloy Ti-25V-15Cr-0.2Si
《Transactions of Nonferrous Metals Society of China》2016年第4期1003-1010,共8页鲁世强 欧阳德来 崔霞 王克鲁 
Projects(51261020,51164030)supported by the National Natural Science Foundation of China;Project(GF201401007)supported by the Open Fund of National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology,China
Dynamic recrystallization (DRX) behavior in β phase region for the burn resistant titanium alloy Ti?25V?15Cr?0.2Si was investigated with a compression test in the temperature range of 950?1100 °C and the strain rate...
关键词:burn resistant titanium alloy deformed microstructure deformation mechanism dynamic recrystallization prediction models 
TB6钛合金β热处理晶粒生长及片层转变行为被引量:6
《材料热处理学报》2015年第4期20-24,共5页邬桑 欧阳德来 鲁世强 余志川 崔霞 
国家自然科学基金(51261020);江西省教育厅科学基金项目(GJJ14505);轻合金加工科学与技术国防重点学科实验室项目(gf201401007)
研究了TB6钛合金β热处理过程中的β晶粒生长及片层结构形成。结果表明,TB6钛合金经β固溶后随不同冷速形成全β组织和(α+β)片状组织。淬火形成的全β组织β晶界平直,晶粒呈等轴状。缓冷下形成的片状组织中原始β晶粒内包含多个α集束...
关键词:TB6钛合金 β热处理 β晶粒 片层结构 
检索报告 对象比较 聚类工具 使用帮助 返回顶部