supported by National Key Research and Development Program of China (No. 2016YFB0701201);National Natural Science Foundation of China (No. 51271027)
Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary...
Projects(51104039,51374059,51304042)supported by the National Natural Science Foundation of China;Project(L2013114)supported by Scientific Research Fund of Liaoning Provincial Education Department,China;Project(2012221013)supported by Programs of Liaoning Province for Science and Technology Development,China;Project(N130602002)supported by the Fundamental Research Funds for the Central Universities China
The single hot thermocouple technique (SHTT) and high temperature equilibrium technique were combined to investigate the phase diagram of the CaO-SiO2-5%MgO-20%AlzO3-TiO2 system. The 1300 ℃ to 1500 ℃ liquidus line...
financially supported by the National Natural Science Foundation of China (No. 51374023)
The liquidus and solidus temperatures of FeCrAl stainless steel were determined by differential scanning calorimetry(DSC) at different heating rates. They were also calculated by Thermo-calc software and empirical f...
financially supported by the National Natural Science Foundation of China under contract No.50874022
Many investigations have revealed that transition of melt structure can effectively influence the final solidification microstructures. In this study, ultrasonic treatment was applied to AI-20%Si melt and Sr-modified ...
supported by the National Natural Science Foundation of China (No. 51271027);the National High Technology Research and Development Program of China (No. 2013AA031601)
Abstract The as-cast microstructures and solidification paths of the Nb-Si-Ti ternary alloys in the NbsSi3-TisSi3 region were investigated. Since there exist some isomor- phous compounds in the NbsSi3-TisSi3 region, s...
the Ministry of Science, Technology and Innovation(MOSTI)Malaysia for sponsoring this study under Grant 03-0 1-02-SF0047
The effect of solid-solution-treatment on the semisolid microstructure of Zn-22Al with developed dendrites was investigated. Forming Zn-22Al products by semisolid metal processing offers significant advantages, such a...
Item Sponsored by National Natural Science Foundation of China(50974034,51074039)
A high temperature equilibration experiment was carried out to investigate the effect of oxygen partial pres- sure on the phase equilibria and liquidus in CaO-Al2O3- FeOx system with the intermediate oxygen partial pr...
supported by the National Basic Research Program of China (Grant No. 2007CB613702);International Cooperation Program in Science and Technology (Grant No. 2007DFC50090)
Based on the theory of micro-inhomogeneity of liquid metal,a calculation model is established for the quantitative description of the structural information of metal melts.Only by thermophysical property parameters an...
Projects(50501020, 50395103, 50431030) supported by the National Natural Science Foundation of China;Project(NCET-05-870) supported by Program for New Century Excellent Talents in Chinese University;Project(CX200706) supported by the Doctorate Foundation of Northwestern Polytechnical University,China
On the base of nonlinear liquidus and solidus,an extended model for dendrite growth in bulk undercooled melts was developed under local non-equilibrium conditions both at the interface and in the bulk liquid.In terms ...
Project(2008BB4177) supported by the Natural Science Foundation of Chongqing City, China
Near-liquidus cast ingot was reheated to semi-solid firstly, and then a bracket of motor was prepared by die casting the semi-solid ingot into mould. The microstructural characteristics of AZ91D alloy in these process...