相关期刊:《Journal of Rare Earths》《Journal of Wuhan University of Technology(Materials Science)》《材料热处理学报》《Journal of Iron and Steel Research International》更多>>
supported by the National Key Research and Development Program of China(Grant No.2022YFB4600900);the National Natural Science Foundation of China(Grant No.52175290).
Based on the advantages of triple-wire gas indirect arc welding(TW-GIA),such as small heat input,low dilution rate,and high deposition rate,the surfacing test on Q345 steel was carried out,and the surfacing forming ch...
This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic ...
supported by the Accelerator and Detector Research Program,part of the Scientific User Facility Division of the Basic Energy Science Office of the U.S.Department of Energy(DOE),under the Field Work Proposal No.FWP-PS032;This research was performed at the Optical Metrology Laboratory at the National Synchrotron Light Source II,a U.S.DOE Office of Science User Facility operated by Brookhaven National Laboratory(BNL)under Contract No.DE-SC0012704;This work was performed under the BNL LDRD 17-016“Diffraction limited and wavefront preserving reflective optics development.”This work was also supported by the Natural Science Foundation of Fujian Province,China,under grant number 2022J011245.
Dwell time plays a vital role in determining the accuracy and convergence of the computer-controlled optical surfacing process.However,optimizing dwell time presents a challenge due to its ill-posed nature,resulting i...
This paper reconsiders the outcome of the adoption of a single legal currency in the 1999 Euro Act. Installing a central bank, several different solutions surfaced among the EU members and in the global economy, since...
The effect of rotational speed in the friction surfacing of nickel-aluminide reinforced Al-Zn-Mg-Cu alloy matrix composite on commercially pure aluminum was investigated. The nickel-aluminide reinforcement was fabrica...
supported by the National Natural Science Foundation of China(21601089,21905140);Jiangsu Specially Appointed Professor program。
Sodium ion battery(SIB)is considered as the potential alternative for next generation energy system to succeed the lithium ion battery(LIB)due to the low price and vast abundance of Na resource.Ternary metal sulfide i...
supported by the National Key Research and Development Program of China(Grant number 2016YFC0300803);the National Natural Science Foundation of China(41406182,41306169 and 41422604);the biodiversity investigation,observation and assessment program(2019-2023)of Ministry of Ecology and Environment of China;Ocean Park Conservation Foundation Hong Kong(MM02-1516,AW02-1920).
Beaked whales represent around 25%of known extant cetacean species,yet they are the least known of all marine mammals.Identification of many Mesoplodon species has relied on examination of a few stranded individuals.P...
the Gordon and Betty Moore Foundation for their financial support of the development of the MODElens and its enabling alignment technologies;the II-VI Foundation Block-Gift,Technology Research Initiative Fund Optics/Imaging Program。
Significant optical engineering advances at the University of Arizona are being made for design, fabrication, and construction of next generation astronomical telescopes. This summary review paper focuses on the techn...
funding support of Babol Noshirvani University of Technology,Iran,through Grant Program No.BNUT/370167/99。
The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as an additive manufacturing proc...
Department of Science and Technology [DST-WOS-A, No.SR/WOS-A/ET-1093/2015 (G)] for funding the project
This work is focused on developing AA2124/4 wt.%B4 C nano-composite coatings on Ti-6 A1-4 V using friction surfacing to improve the wear resistance. The composite was produced using conventional stir casting method an...