supported by the National Natural Science Foundation of China(Nos.51771148,52071263,52031012,and 52322410);the Science Center for Gas Turbine Project(No.P2021-A-IV-001-001);the Key Research and Development Program of Shaanxi Province(No.2023-YBGY-432);the Natural Science Ba-sic Research Plan in Shaanxi Province of China(No.2021JC-13);the Science and Technology Funding Key R&D Industry Foresight and Key Technologies of Jiangsu Province(No.BE2022124);the Re-search Fund of the State Key Laboratory of Solidification Processing(NPU),China(No.2021-QZ-03).
The nucleation and transition sequences of topologically close-packed(TCP)phases in a Re-containing Ni-based single crystal superalloy were systematically investigated using in-situ transmission electron microscopy(TE...
supported by the National Science and Technology Major Project(No.J2019-VI-0011-0125);Shaanxi Provincial Innovation Capacity Support Plan(No.2023-CX-TD-47);the ND Basic Research Funds of NPU(No.G2022WD).
This study investigated the impact of surface degradation caused by oxygen(O)and nitrogen(N)ele-ments in the environmental atmosphere on the service failure of nearly lamellar TNM alloy.The results show that oxidation...
supported by the National Natural Science Foundation of China(Nos.52231001,51971167,and 52031011);the Xi’an Science and Technology Plan(No.2017xasjl014);B.G.gratefully acknowledges the financial support of the project from the Ministry of Science and Technology of China(No.2017YFA0700703);the support by the National Natural Science Foundation of China(No.92060102);E.M.and J.D.acknowledge the support at CAID by XJTU.J.D.acknowledges support from the National Natural Science Foundation of China(No.12004294);the HPC platform of Xi’an Jiaotong University;supported by the Office of Science,Office of Basic Energy Sciences,Materials Sciences and Engineering Division,of the U.S.Department of Energy under Contract No.DE-AC02-05-CH11231.
Single-phase face-centered cubic(fcc)high/medium-entropy alloys(H/MEAs)exhibit a much higher tendency to form nanoscale deformation twins than conventional fcc metals with similar low stacking fault energies(SFEs).Thi...
financed by the National Natural Science Foun-dation of China(Nos.51904183 and 52130204);the Inde-pendent Research and Development Project of State Key Labora-tory of Advanced Special Steel,Shanghai Key Laboratory of Ad-vanced Ferrometallurgy,Shanghai University(SKLASS 2021-Z07);the Science and Technology Commission of Shanghai Munic-ipality(Nos.19DZ2270200,20511107700).
The effects of a high magnetic field on the evolution of the single-phase interface and the liquid-solid interface energy in Al-Cu alloy were investigated experimentally.It is found that the application of the magneti...
Departing from nucleation and growth involved in phase transformations (PTs) and/or plastic deformations (PDs), thermodynamics, kinetics, and thermo-kinetic partition are described. It has been shown that the thermo-k...
This work was financially supported by the National Natural Science Foundation of China(Nos.52275331 and 52205358);the China Postdoctoral Science Foundation(No.2021M701293);the State Key Laboratory of Powder Metallurgy(Central South University,Changsha,China);the State Key Laboratory of Advanced Welding and Joining(Harbin Institute of Technology,Harbin,China);the Key-Area Research and Development Program of Guangdong Province(No.2020B090923001);the Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone Shenzhen Park Project(No.HZQB-KCZYB-2020030);the Academic Frontier Youth Team(No.2018QYTD04)at the Huazhong University of Science and Technology.
Achieving a homogeneous equiaxed grain structure and breaking the strength–ductility trade-off in additively manufactured aluminum alloys is a great challenge.In this paper,we propose a novel duplex nucleation mechan...
financially supported by the National Natural Science Foundation of China(Nos.51790483,51790485,51901029,and U2241232);financial support came from The Sci-ence and Technology Development Program of Jilin Province(Nos.20200401030GX,20200201002JC,and 20200401025GX).
Serious center segregation greatly limits the application of twin-roll casting(TRC)technology for produc-ing 6xxx alloy strips.Herein,Al-0.9Mg-0.6Si-0.2Cu-0.1Fe(wt.%,6061)strips with different thicknesses were fabrica...
financially supported by the National Natural Science Foundation of China(Nos.51871010 and52005022).
In-situ SEM can intuitively observe the changes in microstructure and microcrack initiation during the deformation process of the specimen.In this paper,the microstructural evolution,mechanical properties,and damage n...
the National Natural Science Foundation of China(nos.51571117,51731006,92163215 and 52174364)。
The strength-ductility trade-off has been the most challenging problem for structural metals for centuries.Nanoprecipitation strengthening is an ideal approach to enhance the strength without significantly sacrificing...
the National Natural Science Foundation of China(No.51975593,51775564);the Hunan Provincial Natural Science Foundation of China(No.2020JJ4113);Fundamental Research Funds for the Central Universities of Central South University(No.2021xxts0151);Postgraduate Scientific Research Innovation Project of Hunan Province(No.CX20210226)。
Annealing is one of the most efficient heat treatment to refine the grain microstructure in metal alloys.Prior to the annealing,an aging treatment can be implemented to precipitate the second phases for more nucleatio...